Wrist Watch Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,78 € – 0,96 € netto (bez VAT)
Dla pliku: Watch_Stand _Holder_0.3mm_PLA_MK3S_46m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,87 € netto (środek widełek).
- Masa podana przez autora
- 13 g
- Czas druku podany przez autora
- 46,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This is a stylish watch stand to display your wrist watch(s) and keep them off the table or night stand
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This modern, stylish watch stand has a sleek, minimalist design that’s perfect for displaying your everyday watches. It features smooth geometric lines and a balanced silhouette, combining a stable base with an elegant watch platform that fits a variety of band sizes. Its contemporary aesthetic uses a combination of subtle curves and sharp edges to create a visually striking display piece. The stand’s styling and clean profile make it ideal for personal collections. Designed for easy printing, the model emphasizes precision, symmetry, and an eye-catching modern look.
Watch Stand - Quick Print Guide
Function: Stylish perch for your time keeping device
Material: PLA | Infill: 100% | Layer Height: 0.20 mm
Colors: Go crazy, but I chose a Prusament Viva La Bronze base and Prusament Galaxy Silver for the holder
Assembly: Just insert the Holder into the base. You should not need glue, but add it if you would like.
For more detailed information and instructions please see the the sections below.
Printing
Both Parts:
Print both pieces on flat side
Print Settings:
Filament – PLA is fine, but PETG will be more heat resistant
Infill – 100% for weight on the base
Layer Height – 0.20 mm
Supports – Organic supports on the interior of the holder connector.
Additional Parts – None
Bed Adhesion – Glue stick recommended for reliability
Rafts – None
Scaling – You can scale this for larger or smaller time pieces
Filament Changes – none needed unless you want multi colored prints.
Assembly:
Please Note: Use caution in assembling if the it's not an easy but firm fit.
You should not have to force the Holder into the base. It should be a snug fit, but easy to assemble. If the fit is too tight (some filaments have different tolerances) then you may have to decrease the size of the Holder by 0.99% or 0.98% .
Happy Printing!
Please Support My Work
To help cover the cost of prototyping and sharing models, please consider a donation by purchasing an item from my Amazon wishlist.
Or use this LINK to buy me coffee
I’d also love to hear your feedback—leave a comment if you print this model and let me know how it works for you!
If you like this model, check out my other designs here:
👉 HandyHandcrafts Models on Printables
Award-winning model: Japanese Toolbox – Inspired Locking Lid Box
