Wrist Watch Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.78 – €0.96 net (excluding VAT)
For file: Watch_Stand _Holder_0.3mm_PLA_MK3S_46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.87 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 46.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a stylish watch stand to display your wrist watch(s) and keep them off the table or night stand
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 39
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
This modern, stylish watch stand has a sleek, minimalist design that’s perfect for displaying your everyday watches. It features smooth geometric lines and a balanced silhouette, combining a stable base with an elegant watch platform that fits a variety of band sizes. Its contemporary aesthetic uses a combination of subtle curves and sharp edges to create a visually striking display piece. The stand’s styling and clean profile make it ideal for personal collections. Designed for easy printing, the model emphasizes precision, symmetry, and an eye-catching modern look.
Watch Stand - Quick Print Guide
Function: Stylish perch for your time keeping device
Material: PLA | Infill: 100% | Layer Height: 0.20 mm
Colors: Go crazy, but I chose a Prusament Viva La Bronze base and Prusament Galaxy Silver for the holder
Assembly: Just insert the Holder into the base. You should not need glue, but add it if you would like.
For more detailed information and instructions please see the the sections below.
Printing
Both Parts:
Print both pieces on flat side
Print Settings:
Filament – PLA is fine, but PETG will be more heat resistant
Infill – 100% for weight on the base
Layer Height – 0.20 mm
Supports – Organic supports on the interior of the holder connector.
Additional Parts – None
Bed Adhesion – Glue stick recommended for reliability
Rafts – None
Scaling – You can scale this for larger or smaller time pieces
Filament Changes – none needed unless you want multi colored prints.
Assembly:
Please Note: Use caution in assembling if the it's not an easy but firm fit.
You should not have to force the Holder into the base. It should be a snug fit, but easy to assemble. If the fit is too tight (some filaments have different tolerances) then you may have to decrease the size of the Holder by 0.99% or 0.98% .
Happy Printing!
Please Support My Work
To help cover the cost of prototyping and sharing models, please consider a donation by purchasing an item from my Amazon wishlist.
Or use this LINK to buy me coffee
I’d also love to hear your feedback—leave a comment if you print this model and let me know how it works for you!
If you like this model, check out my other designs here:
👉 HandyHandcrafts Models on Printables
Award-winning model: Japanese Toolbox – Inspired Locking Lid Box
