Gurtner PY carburetor float
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gurtner PY carburetor float used in a lot of 50cc mopeds. I designed this one for my Peugeot Ludix because my original…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Gurtner PY carburetor float used in a lot of 50cc mopeds.
I designed this one for my Peugeot Ludix because my original carburetor float broke and a new one is rare and expensive
Print flat on bed with supports all around with a 0.1 or 0.15 layer height and made from PETG. Print with multiple perimeters so it will be water tight and with 5% infill so it will be very light and work properly.
THIS PART MUST BE PRINTED FROM PETG OR IT WILL MELT IN GASOLINE!!!
Some clean up and sanding may be necessary in the needle area.
I have been using it for a few months and do not have problems so far.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
5%
Filament: Prusa PETG White
Category: Automotive