Liczymy pasujące modele…
This is an adapter for a motorcycle airfilter. The airfilter we had was 35mm inner diameter and the new carburator had a 40mm outer diameter. So, I whipped up an adapter for this. You can customize it to your needs. Print Settings…
This is a DIY tool i made which can be used for carburator tuning/synch. Parts Used: 2x 63mm Vacuum Gauge (DO NOT use a pressure(+) gauge, strictly vacuum one is easier to read/use) I used 0 to -1 bar 1.6 class gauges. 2x ¼" female to…
Stand Supporto Carburatore Dell'Orto Vespa 50 16.16
This is a 4mm nut driver for tuning Stihl HL94 carburator. I suggest to print the handle at 20% infill and the rod at 100% by "modify settings for overlaps" / infill 100% inside the support blocker(in Cura). Print Settings Printer Brand:…
Velocity stack for a Lada carburator. I recommend ABS/ASA/CF NYLON for printing.
Hallo, mein kleiner Bruder hat eine Sachs ZZ 125 Baujahr 2015, der Choke hat gehangen und die Maschine drehte immer auf 5000 Umdrehungen/Minute. Bei näherer Untersuchung hat die Choke Nadel wegen Dreck gehangen. Das war auf eine defekte…
This push button allows to pump gas intop the carburator while i cannot use finger to fill the carb when turning the propeller Modified : 05.10.2019 : added a support to store the push button on the plane Print Settings Printer: HK…
Yamaha XT600E Secondary carb butterfly valve needs 7mm opening in primary carburator slide prior to it's opening. This tool is to make synchronization adjustment easier. Just slide this tool under the carburator slide, obviously flat side…
Needed some velocity stacks to fit inside the airfilters of my Volvo The old airfilters are opened up and a wachable cartidge is sandwiched between the 2 covers with the stacks inside.
Main and idle jet container, infinite expandable! I printed the containers from red TPU and the top and bottom out of PET-G. Both materials are resistant to fuel. Mainjet container is for 6mm hexagonal jets and the idle container is for…
This friction-fit carb cover prevents the prop wash from interfering with the mid-range breather hole on the Walbro HDA-246 Carburator of the GP76 RC gas engine. It helps to smooth out the midrange when tuning the engine. It was…
