1 / 13
ikea skardis board spool storage — zdjęcie 1
1 / 13

ikea skardis board spool storage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this a spool storage system for the ikea skardis peg boards.

Ocena
0 / 5
Polubienia
13
Pobrania
26
Wydruki
0
Wyświetlenia
225
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Public Domain

this is a system im using in my home office to store 1kg rolls of filament as well a 3kg long rolls.

the pictures i took are of the first try and have since added these new parts.

ive also made a spool holder for easy spool swaps and convenance.

i had a bunch of carbon fiber tubes laying around that i decided would look nice but really and tube that matches the size will work.

hardware needed:

  • m3 heat sets x 4

  • m3x8 screw x 4  

  • regular skateboard bearing X4 

  • 30mm OD, 26mm ID tube that can be any length but i used 230mm long X 2 

  • 25mm OD, 21mm ID tube any length, I used 444mm long X 3

  • 25mm OD, 21mm ID tube any length, I used 245mm long X 2

i would print this in at least PETG-GF i did 4 walls and 15% gyroid in fill and it can print with no supports.

Tagi