1 / 7
4in Duct Holder Print in Place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy print in place holder for vertical or vertical ducting
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I also used another self-made model to mount it to my P1S, I'll also link it below.
Also, the duct I used is from AC Infinity.
Print Recommendations:
Layer Height: 0.2mm (standard) or 0.4mm for a faster print
Infill: 20-50% (Grid or Honeycomb recommended)
Supports: None
Material: Works great with PLA, PETG
Walls: As many as needed, but you probably should make the tube section solid.