1 / 3
4in Duct Mount For Back of P1S
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the back of your P1S to output 4 inch duct.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Print the walls pretty thick to make sure it doesn't shear. One of the screws may not fit, but mine didn't and it's still going strong!
The screws used are from the "For Scraper" bag from the original supplies.
Print Recommendations:
Layer Height: 0.2mm (standard) or 0.4mm for a faster print
Infill: 10-15% (Grid or Honeycomb recommended)
Supports: None
Material: Works great with PLA, PETG