Valentine Heart Phone Stand with Secret Message
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print a flirty Valentine heart that holds a phone, hides a message, and sticks to the fridge like love glue.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
This Valentine’s Day, print a heart that does more than look cute. This stand comes in two versions:
Heart‑only base for small phones
Heart with round base for larger phones
Both versions are designed for phones up to 12 mm thick. Need more room? Simply scale the model up in your slicer.
Print Instructions
Materials:
Round base: Pink or Black Matte PLA, with a single color change to PRUSAMENT Lipstick Red PLA
Back rest: Start with pink, then switch to red for a nice layered effect
Settings:
15% infill
0.15 mm layer heights for a smoother heart surface
The heart can also be fitted with 8 mm diameter x 2,6 mm magnet so it hangs proudly on the fridge.
Assembly Instructions
Place the headrest over the round base.
Push the headrest down until it fits snugly into the base opening.
Insert a short piece of 1.75 mm filament into one side of the hinge hole.
Keep pushing until the filament exits through the opposite hinge hole.
Pull the filament back about 3 mm and trim the excess.
Finally, push the trimmed end back into the hinge to hide it and lock the joint in place.


PS
This model is a Valentine’s variant of my previously released Smartphone Stand Ornament for the Holidays. If you enjoyed that one, you’ll love this festive twist.