1 / 4
Front cover for 8-bay nas case for 10" mini rack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front door for 8-bay nas case
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 644
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (2)Kolekcje (26)Powiązane
This is a front door cover for the 8-drive 10" mini rack case I designed.
Assembly
Screw 2 of M3x25 bolts into the tops of the door to serve as hinges.
Mount the handle with 2 of M3x15 bolts.
Use whatever M5 bolts your case uses to mount the hinge and latch sides to the front of your case (through the latch/hinge mount, through the case, into the rack.
Drop bolts of the door into the hinge mount.
Print Setup
Pieces should be oriented as below. 3 or 4 walls. Shouldn't need supports.
