Wii U - AC Power Adapter Cable Repair Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Self locking shell to repair the broken DC cable of a Wii U AC power brick.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 121
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It seems to be a common issue of the Wii U AC power adapter that the cable insulation breaks directly at the strain relief. So I designed this model to act as a shell across the broken part, keeping the cable straight to prevent further damage.
The shell comes in two parts. The lower half securely locks into the strain relief, keeping everything in place. The top half then simply slides on and is locked in place in its final position by two pins that snap into the corresponding notches on the other part.
Don't worry when installing, it's a relatively tight fit on purpose. However, I designed this model for my EU power adapter. I don't know whether the power adapters of different regions feature different dimensions. So keep this in mind when you are in another region and the model simply won't fit.
Print Instructions
Printed in PLA, but any rigid filament should do
2 wall loops
15% gyroid infill
0.12 mm layer height; increasing the layer height would lead to more "stair stepping" on the top surface, which would make it more difficult to slide both parts into each other
No support needed