HASHVAC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this, you can suck your bubble hash dry without the need for a freeze dryer.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 185
- Wydruki
- 0
- Wyświetlenia
- 749
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
NO COMMERCIAL USE!
Simple three-part model. Clamp your mesh between the tube and the sleeve and put your material inside.
But the Hash-Vac is on top of the adapter (I made one for Dyson V8, V12, and a normal 31mm vacuum connector; hashvac_adapter is parameterized so you can make it fit for your model), and start it up. Stir around with a cold spoon. After 5 minutes, put the top on and put it in the freezer for a couple of hours. You can now force the material through a cold metal strainer to separate the trichomes.
Here is a good German video that describes the process:
The Dyson adapter is based on the model here:
Please, no commercial use!
There are enough people trying to benefit from the cannabis hype; please respect the community and don't sell stuff like this on Etsy and Co., unless it's your own model. If ignored, I will take legal steps.