Whispering Kitsune Bust (High Detail 3D Printable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Highly detailed 3D printable bust designed for FDM printing. Optimized for organic tree supports and minimal cleanup.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Ultra-detailed print settings (Cura / Creality Slicer)
Basic settings
Layer Height: 0.08 mm
If your printer is very stable → you can try 0.06 mm, but 0.08 is the best balance.
Initial Layer Height: 0.16 mm
Wall Thickness: 1.2 mm(3 lines with a 0.4 mm nozzle)
Wall Line Count: 3
Top/Bottom Thickness: 1.2 mm
Nozzle & Speed
Nozzle: 0.4 mm
(For maximum detail you can use 0.2 mm, but it will be much slower.)
Print Speed: 40 mm/s
Outer Wall Speed: 25 mm/s
Inner Wall Speed: 35 mm/s
Travel Speed: 120–150 mm/s
Temperature (typical values – adjust for your filament)
PLA: 200–210°C
Bed: 60°C
Supports (very important for this model)
Support: ON
Support Type: Tree (Organic)
Support Overhang Angle: 55°
Support Density: 8–10%
Support Z Distance: 0.2 mm
Enable Support Interface: ON (cleaner surface finish)
Bed Adhesion
Choose one:
Brim: 6–8 mm (recommended)
Raft: OFF (only if you have adhesion issues)
Infill
Infill: 12–15%
Pattern: Gyroid
Quality & Detail
Enable Coasting: ON (cleaner edges)
Enable Z-hop: OFF (unless the nozzle hits details)
Retraction Distance:
5–6 mm (Bowden)
0.8–1.0 mm (Direct Drive)
Retraction Speed: 40–45 mm/s