Whispering Kitsune Bust (High Detail 3D Printable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Highly detailed 3D printable bust designed for FDM printing. Optimized for organic tree supports and minimal cleanup.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
Ultra-detailed print settings (Cura / Creality Slicer)
Basic settings
Layer Height: 0.08 mm
If your printer is very stable → you can try 0.06 mm, but 0.08 is the best balance.
Initial Layer Height: 0.16 mm
Wall Thickness: 1.2 mm(3 lines with a 0.4 mm nozzle)
Wall Line Count: 3
Top/Bottom Thickness: 1.2 mm
Nozzle & Speed
Nozzle: 0.4 mm
(For maximum detail you can use 0.2 mm, but it will be much slower.)
Print Speed: 40 mm/s
Outer Wall Speed: 25 mm/s
Inner Wall Speed: 35 mm/s
Travel Speed: 120–150 mm/s
Temperature (typical values – adjust for your filament)
PLA: 200–210°C
Bed: 60°C
Supports (very important for this model)
Support: ON
Support Type: Tree (Organic)
Support Overhang Angle: 55°
Support Density: 8–10%
Support Z Distance: 0.2 mm
Enable Support Interface: ON (cleaner surface finish)
Bed Adhesion
Choose one:
Brim: 6–8 mm (recommended)
Raft: OFF (only if you have adhesion issues)
Infill
Infill: 12–15%
Pattern: Gyroid
Quality & Detail
Enable Coasting: ON (cleaner edges)
Enable Z-hop: OFF (unless the nozzle hits details)
Retraction Distance:
5–6 mm (Bowden)
0.8–1.0 mm (Direct Drive)
Retraction Speed: 40–45 mm/s