1 / 3
Q-Tip Holder for Honeycomb Wall (HSW) — With Tabs — zdjęcie 1
1 / 3

Q-Tip Holder for Honeycomb Wall (HSW) — With Tabs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified version of the Q-Tip Holder for Honeycomb Storage Wall (HSW), improved for easier printing and added tabs

Ocena
5 / 5
Polubienia
10
Pobrania
36
Wydruki
1
Wyświetlenia
121
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a modified version of the original Q-Tip Holder for Honeycomb Wall (HSW) design, improved for easier printing and more secure mounting.

What’s Changed in This Remix:

✔ Added tabs to the HSW holder
I redesigned the mounting interface by adding tabs so that the holder snaps into the honeycomb wall slots more securely. These tabs help keep the holder in place once weight is added.

✔ Reoriented the .STL for support-free printing
The entire model has been flipped and oriented so it prints cleanly without the need for supports, reducing print time, material use, and cleanup.

✔ Bottom tab intentionally omitted
The bottom tab was left out on purpose. This makes it easy to remove the Q-tip holder by pulling it up, while still relying on the side and top tabs to hold it firmly once loaded with Q-tips.

Tagi