Liczymy pasujące modele…
Designed to save shelf space and eliminate dealing with the cardboard flap every time you need a Qtip. Simply slides on package after removing cardboard flap. Designed for the package in photo, will likely fit off brands but has not been…
Decorative holder for cotton pads (60mm diameter) and buds. Inspired by ancient roman columns, with a 'broken' top for the ruined look.
Designed to save shelf space and eliminate dealing with the cardboard flap every time you need a Qtip. Simply slides on package after removing cardboard flap. Designed for the package in photo, will likely fit off brands but has not been…
Cute holder for bathroom consumables! Help me pay my bills here: https://ko-fi.com/fromdiana
This is made to hold larger reusable cotton rounds, and cotton swabs, or makeup brushes. Also, hold a smaller cup for mouthwash or painting. There are 10 designs. The first number of the file name is how many cotton round wells there are.…
First of all thank you for the smooth design of the original model qtip dispenser rnd . I wanted to use this model because: It covers the cotton parts of the q-tips (ear swabs), they stay cleaner in than other open models. You can grab a…
Print with low layerhight e.g. 0.15/ 0.1mm for the thread to work best. When the print is finished, assemble and carefully repeatly move the threads several times to get them to work. The hight inside with the lid on is about 75mm.
I simple holder with lid for cotton swabs. It is the perfect size to accommodate the 375 count box of Q-tips! The model in the picture was made with the fuzzy skin option!! The g-code does not!
I needed something to hold qtip and cotton balls to assist with cleaning my airbrush. This is a standard 1x1 gridfinity bin with magnets/tabs on the bottom. I designed it in a pizza shape to hold clean qtips on one side and rubbish on the…
Simple 1x1 Gridfinity Bin you could use for Q-tips or anything else….
Decorative holder for cotton pads (60mm diameter) and buds. Inspired by ancient roman columns, with a 'broken' top for the ruined look.
A small holder for cotton pads and qtips, with hooks on the side so you can rest the qtip during use.
this qtip dispenser works by rotating the outer top to the opening where you can grab a qtip to close just turn the outer top piece untill the hole is covered. there are 6 sections so if one ruins out you can turn the center pole, to move…
A simple connector that combines two bins. I provided a STEP file in case you need to adjust the tolerances at all. The pegs are set for .2 tolerance. I printed at 100% infill with PETG
this is a qtip revolver that dispenses 5 qips by moving a plunger back to revolve the cylinder half way, the on the way forward it pushes out a qtip. load qtips from the front. with the plunger forward insert a qtip all the way in. that…
this is a semi automatic qtip dispenser. pull up to load a qtip, then pull down to dispense 1 qtip. has divot in one end to push end of qtip to angle it up to pull out easily. works great. no supports.
A Q-tip holder for the Ikea SKADIS pegboard This design makes use of the universal hooks created by CSD_Salzburg https://www.thingiverse.com/thing:2853257 Not a lot of supports are needed, I personally use the support blocker and block…
a qtip dispenser the main box/dispenser that holds the qtips is placed in the base for storage. the top of the dispener has a sliding lid where you fill the dispenser with qtips. when u want to get a qtip you left the storage…
Used the parametric box generator to create a bod to hold about 9-10 qtips to travel
A very simple travel case for QTips I made for my dad. The lid snaps on to to the base, and has enough space to hold ~36 QTips / cotton swabs. Has a little nub on the outside for grip. I printed mine with Prusament PETG (white) and Elegoo…
Qtip holder for Ikea Skådis. This is a remix from https://www.thingiverse.com/thing:398515 And uses the hooks from: https://www.thingiverse.com/thing:2751867 Remixed with 3dBuilder Print Settings Printer Brand: Creality Printer: Ender 3…
Cute holder for bathroom consumables! Help me pay my bills here: https://ko-fi.com/fromdiana
If you like refilling the Qtip travel packs, you will find that the paper tray inside will eventually wear out. This replaces that tray so you can keep using the travel pack.
a holder for grabbing a qtip from a tray/holder the top rotates up to open enough to grab a qtip no supports
this has rounded ramp for cotton swabs, needs supports. Category: Containers
i made this version to take less time to print. so i shortened it and slotted the bottom out. use supports as in my picture. added a step file. added a closer fitting lid with gripping area. added a bottom file. the added lid and bottom…
I made this insert to fit a plastic box that held Q-Tips. It's a hair too big, but the box still closes so I'll call it good. Customized version of http://www.thingiverse.com/thing:109158 Created with Customizer!…
There are two of my earliest models, and my first practical ones. The bathroom cup holder is designed to fit 3oz bathroom cups (Dixie cups). There are versions of the Qtip holder - one with the cover printing in one piece, which will…
Just a little QTip Holder with a lid, should be printed in “vase”-mode. My wife wanted such a thing, and because I couldn't find the right one I created one. The lid should be a bit loose for easy opening and closing. Edit 2023-01-01: I…
Replaces the cheap paper box that comes with these small travel containers for qtips/cotton swabs.
Printed in petg - 0.08 layer height Uses 2 m2 bolts No support
Qtip Dispenser in two different Versions of the Box. Printable without further support, the necessary support is included in the model
Qtip lengths aren't standardized, so it may not fit some types!
This is designed for Q-tips but could dispense other roughly cylindrical things of similar size. This is a hex peg attachment to the wall, that goes into an empty socket. The larger hex on the back is a spacer to allow room for the lid to…
Just a little storage box for qtips, please share your creations , I would love to see the results ! UPDATE: Made a stronger version, for safer prints.
Nice little Bow and Arrow game! With additional ‘Fingerquiver’! Easy to print (bow in 10 min, targets in 15 min) and easy to use. Arrows can be made out of QTips (cut off one part of the swaps) and targets that can be printed. Arrows can…
This is made to hold larger reusable cotton rounds, and cotton swabs, or makeup brushes. Also, hold a smaller cup for mouthwash or painting. There are 10 designs. The first number of the file name is how many cotton round wells there are.…
This Case can hold up to 12 QTips. It allows you to take them with you, while being protected and kept clean.
pull up top knob to bring up qtips to take them out. i included a step file o make it easy to modify. no supports
Two 1x2x12 containers to store cotton swabs on a gridfinity base with lid. I designed : One horizontal holder One vertical with a divider to minimize scramble One lid with hole One lid with handle I only printed and tried the horizontal…
First of all thank you for the smooth design of the original model qtip dispenser rnd . I wanted to use this model because: It covers the cotton parts of the q-tips (ear swabs), they stay cleaner in than other open models. You can grab a…
I printed it in a Creality Ender 3 V2 0.4 mm nozzle, 0.2 layer hight, 20% infill, 210C and 60C Also used a brim to get a better adhesion. And for the seam alignment I used the option “random”. Took me 6h to print at 60mm/s and turned out…
Just added a cotton swab pic. Printed on Bambu X1C. Bambu PLA - Galaxy Nebula.
Added a snap to the Compact Qtip Dispenser so it can be mounted on multiboard. Printet upright with supports.
Keep your Qtips handy while travelling. Much neater than throwing them in a zip lock bag.
this dispenser allows you to grab 1 tip at a time. just invert to where v is at the bottom and so tips flow down to grab one. the set on its flat surface to let stand without falling over. there is a cover/roof to keep dust out. there are…
