HSW Q-Tip Dispenser (qtip holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed for Q-tips but could dispense other roughly cylindrical things of similar size.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 531
- Wydruki
- 3
- Wyświetlenia
- 2321
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is designed for Q-tips but could dispense other roughly cylindrical things of similar size.
This is a hex peg attachment to the wall, that goes into an empty socket. The larger hex on the back is a spacer to allow room for the lid to fit and not interfere with the back wall.
This print needs support for the peg on the back and for the front interior edge, as shown in the slicer screenshot provided. I used prusa slicer 2.6 organic supports and they worked great for me, I can barely see where they built off the print surface, and with qtips in it won't be visible at all.
I made two versions of the lid with and without the text in case you want to use it for something other than Qtips.
The lid I think looks nice if printed in multiple colors, but it certainly is not necessary.