Samurai Bookmark – Backlit Red Glow

Overview

A slim 50 × 150 mm samurai-themed bookmark in an ink-wash style with a red colour-pop twist. The red is printed in the first layers, so when you hold the bookmark up to a light source it creates a backlit “stained-glass” glow through the artwork.

Check Out my Bookmark Collection at:  https://makerworld.com/en/collections/19290544-bookmarks

Printing Details

• Material: PLA (designed/tested in PLA)

• Print type: flat multi-colour layer swap

• Supports: none (flat print)

• Infill: 100%

• Edges: rounded corners to avoid sharp points (book/pocket friendly)

0.2 mm Nozzle Version (AMS)

• Layer height: 0.04 mm

• Initial layer height: 0.1 mm

• Start: Bambu Red PLA

• Layer 15: swap to Bambu Black PLA

• Layer 24: swap to Bambu Jade White PLA

0.2 mm Nozzle Version (NO AMS)

• Layer height: 0.04 mm

• Initial layer height: 0.1 mm

• Start: Bambu Red PLA

• Layer 15: swap to Bambu Black PLA

• Layer 24: swap to Bambu Jade White PLA

• Manual swaps: pauses are already included in the 3MF

0.4 mm Nozzle Version (AMS)

• Layer height: 0.08 mm

• Initial layer height: 0.16 mm

• Start: Bambu Red PLA

• Layer 8: swap to Black PLA

• Layer 12: swap to Jade White PLA

0.4 mm Nozzle Version (NO AMS)

• Layer height: 0.08 mm

• Initial layer height: 0.16 mm

• Start: Bambu Red PLA

• Layer 8: swap to Black PLA

• Layer 12: swap to Jade White PLA

• Manual swaps: pauses are already included in the 3MF

File Formats Included

• 3MF only

• 4 files total (0.2 / 0.4 nozzle + AMS / NO AMS variants)

Variations

• 0.2 mm nozzle (higher detail)

• 0.2 mm nozzle – NO AMS (pause & swap)

• 0.4 mm nozzle (faster print)

• 0.4 mm nozzle – NO AMS (pause & swap)

Assembly

No assembly required — print and use.

Licence Notes

Personal use only.
Please don’t sell the files or physical prints, and don’t redistribute the files.