Liczymy pasujące modele…
Update: Prusa XL 5T (4 Color) Multi Material Single Print project file added In my pursuit of a 3D-printable Torii, I faced a common issue – all models out there weren't quite compatible with FDM printing. They required more support…
Ever since I learned about kit cards I wanted to make one of my own. I tried to fuse my love of traditional Japanese woodwork and joinery with the art of 3D printing and create a relatively flat kit that allows you to build and snap…
Shinto Torii Gate. Zen and Shinto are both religions with a long history and significant influence in Japan. Shinto is a system of nature worship with prehistoric roots in that country, and its traditions are interwoven with Japanese life…
Torii Gate - Japanese Wall Art
A 4-part Japanese Torii gate General: 0,2mm layer height Printer using PLA Black and Red colour Sizes: 3 pre-generated sized available to download. Main dimensions table below: Height [mm] Width[mm] Small 73 110 Medium 117 177 Large 161…
Japanese Torii (Bonsai Decoration) 90mm x 120mm x 7mm the small panel is held together with double-sided tape Files : Japanese_Torii_Top.stl Japanese_Torii_Middle.stl Japanese_Torii_Foot.stl (To plant or to place) Japanese_Torii_Panel.stl…
Torii inspired by Itsukushima Floating Torii Gate Category: Household
The Torii Gate Chopstick Holder is a unique and stylish accessory for your dining table. Inspired by traditional Japanese architecture, this 3D printed holder is designed to keep your chopsticks neatly organized and within easy reach. The…
Original japanese Torii from Kyoto <3 You have the STL complete model and also Half model to print it without support and clip it with another half torii :) Enjoy!
Torii inspired by Itsukushima Floating Torii Gate Category: Household
Designed to fit on smaller print-beds like the Prusa Mini (barely), this is a two-layer Zen Garden, with a main bed piece and a Torii-Gate made to fit into three separate slots in the bed so that you can position it where you prefer. The…
I made this for my nephew to use with his Lego Ninjago Figures. To save support I made a lot of single parts which you can glue together. Only the roof needs a little support when printed vertically like in the picture. The rest is…
Earrings Pendant Japanese Torii Category: Fashion
I designed this Inarii Torii gate to be placed next to a bonsai tree to convey a sense of scale to the tree. I found an online carpentry course on the construction of a full size gate, which gave me the correct dimensions. If you're…
This chopstick holder in the shape of a Japanese Torii temple is both functional and decorative, perfect for any lover of Japanese culture and traditional art. The symbol on the top is the Japanese symbol for luck, as the Torii temple is…
Made this for a friend of mine, who owns a Japanese Restaurant, as a little Christmas gift and thought I'd share it :-) These models are optimized for FDM printing and everything can be printed in multicolor without a MMU, just a simple…
Torii Gate headphone stand
Crescent Moon & Torii Gate Design
Enjoy this easy to print soap dish! Torii are Shinto gates marking the entrance to their shrines. Very pretty and iconic to Japan. There are many types of torii, not only red. The model is displayed with a “Dove” soap bar, might want to…
Japanese Torii. Self created model. easy to print. Please take a look at my other models and like them.
I created my own Japanese Torii Phone Holder for everyone, who like Japan, Japanese culture and need stylish phone holder :-) I tried to design a very minimalistic and simple design based on Japanese art and Japapnese culture. I took a…
The roof and the base can be stuck or glued together, while the beam is used for sliding in and out to replace the picture. Both sides of the frame can be used as frame, so if you want to have 2 picturtes back-to-back for your desk, have…
Itsukushima Shrine (厳島神社 (嚴島神社), Itsukushima-jinja ) is a Shinto shrine on the island of Itsukushima (popularly known as Miyajima), best known for its "floating" torii . It is in the city of Hatsukaichi, in Hiroshima Prefecture in Japan,…
You can hang the wind chime on a tree or just place it on a window sill using jingle bells instead of the tubes. The torii itself is 31.5cm tall and 28cm wide when assembled. So not small. I used low 5% infill to make it lightweight and…
This wall picture model is made to stay in one piece after printing.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A serene Japanese garden diorama featuring a classic…
This Torii (鳥居) gate design is called " Inari " ( 稲荷 ) the God of Harvest in Japan. Like some of my public designs on my account, I created this gate in pieces in order to use different color filament or hand/spray paint however you like!…
🇯🇵 京都へようこそ! ⛩ Welcome to Kyoto! This model represents the famous thousands of vermilion torii gates, which straddle a network of trails behind the main buildings of the Fushimi Inari Taisha (伏見稲荷大社) an important Shinto shrine in southern…
I printed this with the back of the gate parallel to the bed so any scarring that may occur from supports would be hidden. Of course, you know your printer's capabilities, so print it in a way that works best for you. If perimeter lines a…
Torii Gate over Sand Garden. Print the gate from the top. Best with 0.15mm layer height.
This is a kinetic art Zen garden where you hold the ball off center and release to let the ball create patterns in the sand. With a rake and hoe to smooth out your stand. I designed a spirograph ball that is all 3d printed as well as a 3d…
I created this model starting from the Clean Panel, and that’s essentially all there is to it.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Detailed miniature Japanese torii gate featuring twin…
Entrée de chambre pour mettre sur une porte (taille 2m et des brouettes)
A quick remix of the original design from braga3dprint, making four bars instead of three, to hold your chopsticks. (or in my case, Saber Sticks; I scaled the print up to 150% to fit the Lightsaber chopsticks). From the original…
Japanese Torii with the inscription "Bonsai." It can be prepared for printing in various ways. After printing, simply assemble the parts with supper glue.
Torii Gate designed for wargaming Works with modular wall --> check my other designs
It's a torii gate for qube500, japanese style è uno porta torii per il qube500, stile giapponese
GiGo's first design (I learned tinkercad for this) Needs build plate supports Takes about an hour Pictured design was printed face up in Prusament PLA Jet Black and Prusa Matt PLA Race Red with a manual color change at 4.20. xoxo gigo
Carry a piece of serene Japanese garden art into your next read with this stunning 3D printable bookmark. 🐠⛩ The design features Koi fish swimming in a pond with lily pads, surrounded by bamboo and overseen by a traditional Torii gate and…
End cap 2020 Ender 3 Torii Category: 3D Printing
Il s'agit là des pièces qui permettent de faire un Torii plus large que le précédent. Il faut charger les pièces du modèle de base en plus et faire un mix de votre choix. Plusieurs configurations possibles, à vous de jouer.
Mark your page with a joyful cultural fusion! This festive 3D printable accessory features a massive pile of Christmas Gifts surrounded by adorable little monsters (or creatures), all set against a snowy Japanese scene with a Torii Gate…
Mark your page with adorable festive fun! This delightful 3D printable accessory features a cheerful Penguin wearing a scarf and hat, surrounded by cute creature friends. The scene is set in a snowy Japanese landscape with a decorated…
Simple model of a Japanese torii gate with stones and a tree stump I made a few years ago.
Mark your page with a unique winter journey! This captivating 3D printable accessory features a majestic Polar Bear wearing a Santa hat next to a decorated Christmas Tree . The scene is a unique fusion: the background is a snowy Japanese…
With this puzzle/balance game you can this gate. If you will use your imagination, it will look like Torii gate from Japan. In photos you can see the already built model and all pieces. This balance game can be used for some for example…
A stylized 3D model of a traditional Japanese Torii Gate, inspired by the famous Fushimi Inari Shrine in Kyoto, Japan. Crafted in Blender, this model features clean geometry suitable for games, rendering, scene decoration, and 3D printing…
Japanese Torii with the inscription "Bonsai." It can be prepared for printing in various ways. After printing, simply assemble the parts with supper glue.
With this puzzle/balance game you can this gate. If you will use your imagination, it will look like Torii gate from Japan. In photos you can see the already built model and all pieces. This balance game can be used for some for example…
A touch of Zen for your tank: this Japanese Torii Gate Aquarium Hide offers both tranquility and utility, making it the perfect feature piece for any aquascape or terrarium setup. Designed with shrimp, small fish, reptiles, amphibians and…
Simple model of a Japanese torii gate with stones and a tree stump I made a few years ago.
This wall picture model is made to stay in one piece after printing.
🇯🇵 京都へようこそ! ⛩ Welcome to Kyoto! This model represents the famous thousands of vermilion torii gates, which straddle a network of trails behind the main buildings of the Fushimi Inari Taisha (伏見稲荷大社) an important Shinto shrine in southern…
I was impressed by the Torii gates shape during my last visit to Japan. Torii gates represent the border between the secular world and the sacred worlds of the Shinto religion (Japan). I added the “TORII” name in Japanese on the handle…
Dimension : 50 cm de large, 27 cm de haut et 5 cm d'épaisseur. J'ai mis deux rondelles différentes, droite ou biseauté selon votre choix. Le symbole signifie normalement Harmonie. La pièce centrale permet de fixer le tout au mur et il y a…
⛩ Traditional Japanese Torii Gate – 3D Printable Model ⛩ This beautifully designed 3D model represents a traditional Japanese Torii gate , a spiritual symbol found at the entrance of Shinto shrines, where it marks the passage from the…
A friend of mine inspired me to design the Japanese Gate to support 世界平和. Sekai heiwa (世界平和) means world peace. Print pillars twice.
A display stand specifically designed for small toys from gashapon machines.
A touch of Zen for your tank: this Japanese Torii Gate Aquarium Hide offers both tranquility and utility, making it the perfect feature piece for any aquascape or terrarium setup. Designed with shrimp, small fish, reptiles, amphibians and…
I initially made this for nintendo switch, but it also works for phone, tablet, album CDs, etc. Print as individual parts. You may need sandpaper, glue, and some patience for the assembly. Category: Mobile Phone
Chopstick holder in the style of a Japanese "Torii". Print the “Roof” piece on the side. Print the "Base" piece base down. Assemble both pieces with a piece of raw filament and glue. I recommend printing the roof piece in black and the…
These are simple but elegant chopstick holders designed after a Japanese torii gate. There is a 15 degree tilt for a better rest. I would print it on end to avoid supports. Happy Printing
I was impressed by the Torii gates shape during my last visit to Japan. Torii gates represent the border between the secular world and the sacred worlds of the Shinto religion (Japan). I added the “TORII” name in Japanese on the handle…
Give your aquarium a Japanese tint with this torii gate! Print 2 times and glue them together so you dont need supports
After feeling envious of others' cool 3D terrains, I decided it was time to create my own. I was determined not to spend money on it, so I embarked on the process of making one. The first version was a very basic design, but it…
Japanese torii style headphone holder, divided into several pieces, can be used as a decorative ornament
Easy to print without supports, if split in half down the middle, both halves printed lying down and then glued together.
I shrunk the various parts of Ensi's design so that it would fit within the gate slot of my storage insert for the game. Had to move some holes and resize to get it just right. I did not do any of the initial designing of this so full…
