Torii (Inari) Gate - 鳥居 (稲荷)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is designed in many pieces for all to enjoy a piece of Japan.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Share Alike
This Torii (鳥居) gate design is called "Inari" (稲荷) the God of Harvest in Japan.
Like some of my public designs on my account, I created this gate in pieces in order to use different color filament or hand/spray paint however you like!
All separated pieces to make this model whole have square and round male-end pegs and connects to the appropriate female end. The stancions have a square hole so that anyone can make a plate or something to attached this model as they please.
As you see the middle plank called “Nuki”, there is a ledge protruding from the front. This is for placing letters and other items on there.
DOES NOT come with a model chain-link to attach the “Square Plate”!
Recommended slicer settings based on Cura by Ultimaker:
Quality: Standard or Higher
Print Speed: For the Hashira and Kasagi can be 40-50 mm/s.
All others can be 70 or higher mm/s.
Supports: Definitely for the Hashira, Kasagi, and Daiwa but for the other models is at your discretion and may not need it. If ever in doubt, support it out!
I designed this because of my interest and respect to the Japanese culture and architecture!