Japanese Torii Gate Business Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Torri Gate Business Card Holder (no MMU required)
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 528
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this for a friend of mine, who owns a Japanese Restaurant, as a little Christmas gift and thought I'd share it :-)
These models are optimized for FDM printing and everything can be printed in multicolor without a MMU, just a simple color change by layer height.
Recommended settings:
Card Holder
- 0.2 layer height
- 6 bottom, 5 top layers
- seam position rear
Base
- 0.2 layer height
- 5 bottom, 5 top layers
- 3 perimeters
- seam position rear
- 15% gyroid infill
- color change at 5.2 and 7.2 if desired
Gate
- 0.15 layer height
- 3 perimeters
- 20% gyroid infill
Top
- 0.15 layer height
- 3 perimeter
- 20% adaptive cubic infill
- color change at 5.9
Panel
- 0.2 layer height
- default
- color change at 1.2
Alternatively just import the 3mf's as project, adjust printer and filament to your needs and everything else is set up.
If you're having trouble with tolerances of the base plate during assembly, change settings to print outer perimeter first.
I used medium CA and and an activator for assembling, worked great.
On the base plate I added 2 stripes of 3M 9448A Double Coated Tissue Tape to prevent it from sliding around.
Filaments used:
Prusament Marble Grey, Gravity Grey, Jet Black, Viva la Bronze, Galaxy Silver and Galaxy Black PLA and Polyterra Muted Red PLA.