1 / 1
Japanese Torii Gate Business Card Holder — image 1

Japanese Torii Gate Business Card Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Torri Gate Business Card Holder (no MMU required)

Rating
5 / 5
Likes
22
Downloads
116
Makes
1
Views
531
Reviews
1

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

Made this for a friend of mine, who owns a Japanese Restaurant, as a little Christmas gift and thought I'd share it :-)

These models are optimized for FDM printing and everything can be printed in multicolor without a MMU, just a simple color change by layer height.

 

Recommended settings:

Card Holder

  • 0.2 layer height
  • 6 bottom, 5 top layers
  • seam position rear

Base

  • 0.2 layer height
  • 5 bottom, 5 top layers
  • 3 perimeters
  • seam position rear
  • 15% gyroid infill
  • color change at 5.2 and 7.2 if desired

Gate

  • 0.15 layer height
  • 3 perimeters
  • 20% gyroid infill

Top

  • 0.15 layer height
  • 3 perimeter
  • 20% adaptive cubic infill
  • color change at 5.9

Panel

  • 0.2 layer height
  • default
  • color change at 1.2

 

Alternatively just import the 3mf's as project, adjust printer and filament to your needs and everything else is set up.

If you're having trouble with tolerances of the base plate during assembly, change settings to print outer perimeter first.

I used medium CA and and an activator for assembling, worked great.

On the base plate I added 2 stripes of 3M 9448A Double Coated Tissue Tape to prevent it from sliding around.

 

Filaments used:

Prusament Marble Grey, Gravity Grey, Jet Black, Viva la Bronze, Galaxy Silver and Galaxy Black PLA and Polyterra Muted Red PLA.

Tags