'Gridfinity Rebuilt' based bin for 'Wera Kraftform Micro'
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable, parametric gridfinity-compatible bin for 7 Wera Kraftform Micro screwdrivers, based on Gridfinity Rebuilt
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a 'Gridfinity Rebuilt' based bin for seven Wera Kraftform Micro screwdrivers. It is stackable and has a height of 4 units.
If you wish to modify parameters of this model, e.g. custom bin settings, check out the online generator.
Other models for these screwdrivers were either not stackable, didn't fit the screwdrivers properly, did not have bases that could easily be modified for gridfinity rebuilt, or are not available on printables.
Yes, the screwdrivers in the picture are not all the same length. I did not treat them well 😔