1 / 3
AD5X/AD5M Vent Cover w/ 41.5mm hole for temperature & moisture sensor — zdjęcie 1
1 / 3

AD5X/AD5M Vent Cover w/ 41.5mm hole for temperature & moisture sensor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vent cover for the AD5X/AD5M which has a 41.5mm cutout hole for a temperature/moisture sensor

Ocena
5 / 5
Polubienia
25
Pobrania
106
Wydruki
1
Wyświetlenia
682
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted a solid piece to fill the empty vent covers to help keep heat & fumes in, but also wanted somewhere to place a temperature & moisture sensor, so I figured this will do the trick. I made the hole 41.5mm, which fits my AliExpress temperature/moisture sensor fairly well (41.5mm-42mm is apparently the common size for these Digital Hygrometers). I had to lightly sand the hole to get rid of any rough filament, which allowed the sensor to go in nicely. 

This mod allows for a clean aesthetic, while being functional. Well worth adding to the enclosure in my opinion. 

Tagi