Dry Box_Prusa XL

I have designed a printed a nice working Dry Box that Mounts in the side of you XL. Currently it can accomodate 4x spools without the Prusa Orignal Enclosure easily, but it can get crowded without the original enclosure and if you are using one of the aftermarket enclosures. I have included many pictures and I hope to have a better set of instructions or a link to an instructional video soon.  I have set the printed parts up for multi material printing if you choose to incorporate a TPU seal. I personally don't think it requires it. It is benificial to use some wax on the threaded parts such as the desicant container. There is some extra hardware that is requred.

I used PETG for the DryBox material. I think that PLA would be fine also if not heated in any way.

-Printer Setting 0.2mm SPEED @ XLIS 0.4mm (modified) (of course 0.4mm nozzle)

-For the threaded parts I used modifed setting of the 0.2mm STRUCTURAL @ XLIS 0.4 including

          -Adaptive layer height in order to reduce layer heights for threads at 0.15mm

          -I slowed the over hanges down to 0% Overlap=3mm/s, 25% Overlap=7mms, 50% Overlap=12mms,                75% Overlap=70%

-Don't forget to wax the threads and I'll make a design for threaded parts using a 0.6mm nozzle soon. I can't test it right now though because I don't have a 0.6mm nozzle.

For each dry Box you will need (if you make two boxes double the amount, etc)

-(4) M4x8mm Thumb Screws or (4) M4x8mm Screws with Washers

-(1) M4x35mm Screw for fastening the Spool holder to the frame though the Dry Box and Adapter (the adapter is allowing space for the Original Prusa Enclosure to be opend and closed. 

-(4) Heat Set Threaded Inserts (used for fastening the desicant canister housing to the Dry Box)

-(1) Pnuematic Fitting 

(1) Small Piece of Bowden Tubing (it inserts into the Threaded Pnuematic Fitting Insert_Female_V2, in order to decrease wear from friction)

-You will also need screws for the adpater that mounts on the Prusa Original Enclosure, I just can't remaber the size right now. It will actually mount where the secont LED light strip would go, and accomodates for a third dry Box nicely  on the left side of the printer. 

Please reach out to me if there are any questions, and I'll be updating files as this project evolves. 

If a list to the parts are desired please reach out to me and I will inlcude if I haven't already.