RPM long arm (Bandit) conversion for RC10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RPM80492 and RPM73282 arms mounted on RC10.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom parts for mounting RPM73282 (Bandit) rear arms on RC10. Arm itself has 3deg toe-in therefore this arm mount has 0deg toe-in. Both 1deg and 2deg anti-squat arm mounts included in this set. B4-series CVA/CVD bone and wheel needed. Standard RC10 hub. Front arm RPM80492 can be mounted without any special parts.
Original build topic
https://www.rc10talk.com/viewtopic.php?t=40129
PARTS:
Front end:
-10T kickup ASC7305 and bulkhead ASC7207
-Inner hinge pin ASC7209
-Front arm RPM80492
-Outer hinge pin ASC8423 or ASC7357
-Caster and steering block ASC6210 + ASC6225
-T3/B3 front axle ASC7221
-B4 Front wheel ASC9588 or ASC9688
Rear end:
-Inner arm mount "RPM73282 Arm Mounts 0-1" or "RPM73282 Arm Mounts 0-2"
-Inner hinge pin ASC6380
-Rear arm RPM73282 (inbuilt 3deg toe-in)
-Outer hinge pin ASC6381
-Rear hub ASC7364 for 3deg/side toe-in
-Rear hub ASC7367 for 1.5deg/side toe-in
-B4 CVA/CVD bone ASC9672/ASC9597
-B4 pin or hex wheel