RPM long arm (Bandit) conversion for RC10
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RPM80492 and RPM73282 arms mounted on RC10.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 312
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom parts for mounting RPM73282 (Bandit) rear arms on RC10. Arm itself has 3deg toe-in therefore this arm mount has 0deg toe-in. Both 1deg and 2deg anti-squat arm mounts included in this set. B4-series CVA/CVD bone and wheel needed. Standard RC10 hub. Front arm RPM80492 can be mounted without any special parts.
Original build topic
https://www.rc10talk.com/viewtopic.php?t=40129
PARTS:
Front end:
-10T kickup ASC7305 and bulkhead ASC7207
-Inner hinge pin ASC7209
-Front arm RPM80492
-Outer hinge pin ASC8423 or ASC7357
-Caster and steering block ASC6210 + ASC6225
-T3/B3 front axle ASC7221
-B4 Front wheel ASC9588 or ASC9688
Rear end:
-Inner arm mount "RPM73282 Arm Mounts 0-1" or "RPM73282 Arm Mounts 0-2"
-Inner hinge pin ASC6380
-Rear arm RPM73282 (inbuilt 3deg toe-in)
-Outer hinge pin ASC6381
-Rear hub ASC7364 for 3deg/side toe-in
-Rear hub ASC7367 for 1.5deg/side toe-in
-B4 CVA/CVD bone ASC9672/ASC9597
-B4 pin or hex wheel