1 / 5
Whetstone wet box and stand for @firstgizmo's Knife Sharpener
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for whetstone. Can be filled with water. Can be stand for @firstgizmo's Knife Sharpener. Customizable.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
To simplify the use of the Knife Sharpener, I designed a storage container for the whetstone. It allows you to store the whetstone and soak it before use. Additionally, the Knife Sharpener can be placed on top.
To prevent leaks, proper print settings are necessary. I used the following parameters:
Filament: PETG
Layer height: 0.24
Number of perimeters: 5
Number of top/bottom layers: 5
Filament flow: 1.05
There is an option to customize it for different whetstone sizes using OpenSCAD.