Side Handle for PC4-M6 Pneumatic Coupler for Prusa CORE One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification of the original CORE One side handle for PC4-M4 pneumatic coupler.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 270
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1
This is a high quality modification of the original CORE One side handle for a PC4-M4 pneumatic coupler.
The model has been adapted from the original CAD model released by Prusa. The resulting part has a high quality mesh unlike other modifications that were released earlier and based on meshes with lower quality.
If you like this modification, please consider leaving a ♥heart. Thanks!
+++ See my drybox project which is a great fit for this model. +++
----------
Assembly
The goal is to fit a piece of PTFE tube (e.g., the one used with the original handle) between the pneumatic coupler and the filament sensor.
Push the tube completely into the handle and filament sensor. A bit should protrude from the handle.
Mark the section that protrudes from the handle.
Subtract additional 5–6 mm before cutting the tube.
Insert the length into handle and sensor and screw the pneumatic coupler in.
The tube should fit a bit loosely so that it does not deform when the pneumatic coupler is screwed in.
----------
Printing
Filament material: PETG
Resolution: 0.20 mm
Infill: 20% mm Grid
Supports: No