1 / 8
Body Mounts for 1/10 Toyota Comp Body on Traxxas TRX4 — zdjęcie 1
1 / 8

Body Mounts for 1/10 Toyota Comp Body on Traxxas TRX4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are designed to fit the 1/10 Toyota Comp Crawler Body by jasonboz56 on MakerWorld to the Traxxas TRX4 chassis.

Ocena
0 / 5
Polubienia
5
Pobrania
68
Wydruki
0
Wyświetlenia
482
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

These are designed to fit the 1/10 Toyota Comp Crawler Body by jasonboz56 on MakerWorld (1/10 Toyota comp Crawler body - Free 3D Print Model - MakerWorld) to the Traxxas TRX4 chassis.

These parts replace the original bumper mounts on the TRX4. Designed to work with these sliders from the same maker: Traxxas Trx4 Sliders - Free 3D Print Model - MakerWorld

You have the option to print a new grill that includes bosses for your standard body mount pins, which I recommend, or you can print the add-on piece and glue it or bolt it onto the bottom of the existing grill. 

The rear lower bar on the roll cage snaps into the rear mount and allows the body to pivot up out of the way for quick things like replacing the battery.  It easily snaps in and out as well to completely remove the body. This does require cutting a bit off the chassis rails on the rear of the vehicle to fit the body. 

UPDATE 02/09/26: beefed up the front bumper to make it handle a little more abuse.

Tagi