Body Mounts for 1/10 Toyota Comp Body on Traxxas TRX4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are designed to fit the 1/10 Toyota Comp Crawler Body by jasonboz56 on MakerWorld to the Traxxas TRX4 chassis.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 69
- Makes
- 0
- Views
- 517
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
These are designed to fit the 1/10 Toyota Comp Crawler Body by jasonboz56 on MakerWorld (1/10 Toyota comp Crawler body - Free 3D Print Model - MakerWorld) to the Traxxas TRX4 chassis.
These parts replace the original bumper mounts on the TRX4. Designed to work with these sliders from the same maker: Traxxas Trx4 Sliders - Free 3D Print Model - MakerWorld
You have the option to print a new grill that includes bosses for your standard body mount pins, which I recommend, or you can print the add-on piece and glue it or bolt it onto the bottom of the existing grill.
The rear lower bar on the roll cage snaps into the rear mount and allows the body to pivot up out of the way for quick things like replacing the battery. It easily snaps in and out as well to completely remove the body. This does require cutting a bit off the chassis rails on the rear of the vehicle to fit the body.
UPDATE 02/09/26: beefed up the front bumper to make it handle a little more abuse.