P
PrintablesIc3Gr33dy
PIR HC-SR501 Case
This is a case for your PIR sensor. It fits perfectly into the case. Have fun :)
- Downloads
- 632
- Likes
- 47
- Rating
- 4.88
Search results: sr5
Counting matching models…
P
PrintablesCranklotus
1/10 SR5 Toyota pinched body RC
Pinched Toyota body for 1/10th scale, made the roof taller.
- Downloads
- 547
- Likes
- 88
- Rating
- 5
P
PrintablesCorn Leaf
HC-SR501 (SR501 / SR-501) PIR Sensor Tiny Case w/ Snaps
Smallest possible case for the HC-SR501 PIR with snaps, mounting posts and indexing notch. Screws or tape mount to wall.
- Downloads
- 485
- Likes
- 33
- Rating
- 5
P
PrintablesHouse3D
PIR HC-SR501 Housing Without Extension
Remix of the HC-SR501 with extension. I removed the back but included a slight gap in the back for cable to run through. Print Settings Printer: REPRAP Samuel Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 40% Category:…
- Downloads
- 423
- Likes
- 17
- Rating
- 5
P
Printablesopentux
HC-SR501 PIR ceiling case
Dear makers, we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR501. Diameter of the installation hole is 44 mm. Housing includes lens cover, which can be glued to the housing, enabling to reduce the angle from…
- Downloads
- 340
- Likes
- 23
- Rating
- 5
P
PrintablesManelTo
PIR HC-SR501 (step format)
An HC-SR501 PIR component in step format for use in your own designs.
- Downloads
- 307
- Likes
- 13
- Rating
- 0
P
Printablesclement0635
Support and enclosure for HC-SR501 motion sensor module
This enclosure is designed to fit perfectly an HC-SR501 motion sensor module such as this one .
- Downloads
- 261
- Likes
- 26
- Rating
- 5
P
PrintablesA-maze-1ng
PIR sensor housing with movable mount (HC-SR501)
For my project I needed a articulated mount for the HC-SR501 PIR senor. The base plate can be attached with M3 wood screws. The coupler needs to print with support. What you need: 4x M3 heat insert (I used M3x5.7mm) 4x M3x8 screw 3x M3x12…
- Downloads
- 187
- Likes
- 18
- Rating
- 5
P
PrintablesRitchbitch
Intake Funnel ø62mm for Mikuni VM36-4 as sold for Yamaha SR500 XT500 TT500
Intake Funnel with ø62mm inner diameter. Source files included. For Mikuni VM36-4 as sold by Kedo.
- Downloads
- 179
- Likes
- 19
- Rating
- 0
P
Printablesbeerman
PIR Motion Sensor - WEMOS D1 Mini + HC-SR501 - Philips Hue
After making one of Qrome's awesome print monitors I noticed how similar in size the OLED module and a PIR sensor I had to hand were. So instead of reinventing the wheel and creating a new body for the motion sensor I remixed Qrome's…
- Downloads
- 164
- Likes
- 17
- Rating
- 5
P
PrintablesScott Gibb
HC-SR501 PIR Sensor Case
HC-SR501 PIR Sensor Case This thing is a simple bolt-on case for the HC-SR501 PIR Sensor, the case is designed so that it can slide onto my Panasonic TV and face the rest of my room. The case was designed using an open source step file…
- Downloads
- 149
- Likes
- 10
- Rating
- 0
P
PrintablesCardil
Sleds feet for Accu-Tac SR5 bipod clone
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
- Downloads
- 139
- Likes
- 9
- Rating
- 5
P
Printablesopentux
DHT22 + HC-SR501 PIR ceiling case
Dear makers, we would like to share our ceiling case for DHT22 sensor, together with PIR Arduino compatible sensor HC-SR501. Use two 2x4mm screws for fixing PIR. Drill hole 67 mm. We tested with PETG due to higher temperature resistance…
- Downloads
- 121
- Likes
- 17
- Rating
- 0
P
PrintablesChris Twomey
HC-SR04 + HC-SR501 Casing + Angle Adjustable Cradle
Remix from https://www.thingiverse.com/thing:1799012 Allows housing for both HC-SR04 and HC-SR501 for when you need both motion and distance detection. It also fits a small microcontroller in the rear, though you will need to use glue or…
- Downloads
- 107
- Likes
- 14
- Rating
- 0
P
Printablesplanetar
Case for ESP32, PIR HC-SR501, 0,96 I2C Display and 2 more sensors
This is an enclosure for 3 sensors, a display and a ESP32 to run them all. It has quite some volume and a lot of air vents and it keeps the sensors in pockets that can be sealed with a bit of gum to keep the influence of waste heat within…
- Downloads
- 100
- Likes
- 8
- Rating
- 0
P
PrintablesIra S
PIR HC-SR501 IR Sensor Enclosure for Arduino and Raspberry Pi
Small enclosure for a HC-SR501 PIR Infrared Sensor. Enclosure includes notch for use with a small cable tie to secure the cable so it won't pull out. Additional hole below the sensor hole is for an optional LED if you want to add one to…
- Downloads
- 94
- Likes
- 11
- Rating
- 0
P
Printablesxperts_avenue
Abdeckung Steuerkopf Simson S50 S51 S53 SR50
🇩🇪 Beschreibung (Deutsch) Abdeckung für einen Steuerkopf einer Simson S50, S51, S53 oder SR50 , wenn keine Bowdenzüge durch den Steuerkopf geführt werden müssen. Die Abdeckung wird idealerweise aus TPU gedruckt, sodass sie sich dank des…
- Downloads
- 89
- Likes
- 14
- Rating
- 0
P
PrintablesMark B
Wemos D1 mini with shield, PIR (HC-SR501), DHT22 and 3 leds
Holder for D1 Mini with shield and LEDs. Optional separator that can be wrapped in Aluminium foil to provide additional shielding
- Downloads
- 72
- Likes
- 4
- Rating
- 0
P
PrintablesChristian Fornes
Master volume knob Onkyo TX-SR501E
50mm OD 27mm Tall Volume knob for 6mm potentiometer shaft.
- Downloads
- 57
- Likes
- 5
- Rating
- 0
P
PrintablesKiDChaos
Yamaha SR500 Sidecover rubber
- damper for Sidecovers for the Yamaha SR500 and SR400 - in complete you need four of these - best print in TPU to get some dampening effect (#goodVibrations) :)
- Downloads
- 54
- Likes
- 8
- Rating
- 0
P
PrintablesBantje_k
3D Printed Motion Sensor Case (ESP8266, USB-C, ESPHome, HC-SR501)
This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…
- Downloads
- 45
- Likes
- 7
- Rating
- 0
P
PrintablesPistonPin
Spacer to fit a PZ16 carburetor on a NSR50
I'm on and off tinkering on my NSR50 project bike. I want it to be as stock as possible, but original carburetors are surprisingly hard to come by (or ridiculously expensive), so as a temporary solution I designed this custom spacer to…
- Downloads
- 40
- Likes
- 6
- Rating
- 0
P
PrintablesNotLikeALeafOnTheWind
8020 mount HC-SR501 Infrared Distance Sensor w-cable tie start v2
A mount for an HC-SR501 sensor with cable ties. The mount may be used stand alone or mounted to an 8020 series 10 extrusion. Print instructions Unassociated tags: infrared sensor mount Category: Electronics
- Downloads
- 33
- Likes
- 3
- Rating
- 0
P
PrintablesSektor 7 Studios
SIMSON SR50 STRING-ART / DECORATION
Hello everyone :) Attention SIMSON SR50 fans. I have designed a very cool string art stand with SIMSON SR50 LOGO for you. Both the stand and the SIMSON SR50 string art are very easy to print and use very little filament. The principle…
- Downloads
- 30
- Likes
- 8
- Rating
- 0
P
PrintablesWilliam Arsenault
Aprilia SR50 Air Intake Adapter
Air intake adapter for the aprilia SR50 Moped. This adapter allows you to fit dirtbike and moped cone filters onto the moped. Its supported from one of the screws holding in the wheel cover.
- Downloads
- 24
- Likes
- 7
- Rating
- 0
P
PrintablesTadeas.Grohmi
HC-SR501 PIR sensor case
There is hole for some cables and also there is space for neodymium magnet. Im using esp8266 and ESPhome. Made for wall mounting
- Downloads
- 24
- Likes
- 0
- Rating
- 0
P
PrintablesFrAllard
SR550 Server 60x25mm Fan Adapter for Silent Cooling
This adapter enables the installation of 60mm x 25mm fans into Lenovo SR550 servers, reducing noise without affecting cooling. It uses two 30mm M4 screws for mounting at the bottom, with an option for a zip tie at the top for extra…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesMichaelW
Aprilia SR50 Factory DITECH DI-TECH fuel pump service stands and tool
These are stands and tools to work on your aprilia SR50 fuel pumps! The round part with the square hole can be used to lightly tap down on the fuel pump cover to help work in some silicone lubricant for removal. The stands just help you…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesMalaMaker
HC-SR501 PIR Motion Sensor Housing (w/ moisture seals)
This is a motion sensor housing originally designed for Halloween decor motions sensors. The mounting holes inside the enclosure are for a custom designed PCB breakout board. The cable seals are sized to pass through cat6 cable. Hardware:…
- Downloads
- 15
- Likes
- 4
- Rating
- 0
P
PrintablesBlitzbakwa
Audio Technica ATH-SR50 BT Headband Attachment Replacement
Replacement part for the headphone attachment. Uses the original screws. Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No **Filament:** Generic PETG Category: Audio
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
Printablestmhanlon
SmartRG SR516AC Wireless Router Wall Mount
Use to mount SmartRG SR516AC wireless router to a wall.
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
Printablesqman
Sun Visor Mount Corolla SR5 Coupe
Designed for passenger side based on stock version. Slight changes from stock to optimize for printing. printed in ASA, works great!
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesSaufziege
Ersatz-Gabelabdeckung (TPU) - Kompatibel mit Aprilia SR50 / Piaggio Group (OEM AP8217034)
Dies ist eine zurückentwickelte (Reverse Engineered) Abdeckung, die vom Originalteil nachgezeichnet und für den 3D-Druck optimiert wurde. Es handelt sich um den "Front Fork Lower Closing" (Piaggio U. Verschl. Gabel) , der in der…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesOldschool
Yamaha SR500 damper instruments
- replacment dampers for the instruments - slicer: Cura - printing material: Generic TPU Nozzle 220°C, Bed 50°C - printing orientation: flat, not supports
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesRunge Kutta
Sleds feet for Accu-Tac SR5 bipod clone (remix)
These sliding bipod bases are designed for a Chinese copy of the Accu-Tac SR5 QD bipod. This version does not require mounting screws; it simply threads directly onto the M5 threaded stud (headless) found on the Chinese Accu-Tac clones.…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
Printablesdanbaker
SR51aBumperCase
This is a Bumper Case for a Texas Instruments SR50 (or SR51A) calculator (from the mid 1970's) I printed these in 2 types of flexible filament: Gizmo Dorks Flexible TPU - TPU with a shore hardness of 96A 3D Solutech Real White 1.75mm…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
Printablesbucketofcookies
Bracket (Sonos Beam - Peerless AV SR575M TV Cart)
This bracket allows you to connect a Sonos Beam (Gen 2) on the Sonos Beam Wall Mount to a Peerless SR575M TV Cart. You'll need some M8 screws and M8 T-Slot Spring-Loaded Nuts for attaching it to the Peerless cart. I had some spare M8…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesOldschool
Yamaha SR500 damper for backlight holder
- replaces rubber damper between fender and backlight - slicer: Cura - printing material: Generic TPU Nozzle 228°C, Bed 0° - printing orientation: flat with support
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesbucketofcookies
Power Cord Hook for Peerless AV SR575M TV Cart
A hook to store an extension cord as you move around a Peerless AV SR575M TV Cart. You'll need some M8 screws and M8 T-Slot Spring-Loaded Nuts for attaching it to the Peerless cart. I had some spare M8 screws from an old TV mount and then…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesSchweller3D
Aprilia SR50 Old (1992–1997) – Frame Number Cover / Inspection Hatch
Is the frame number cover / VIN hatch missing on your classic Aprilia SR50 Old (first generation, manufactured from 1992 to 1997)? Since these original plastic parts are virtually impossible to find or often broken, I 3D-modeled a custom…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesSteamtrain
HiLux SR5 sports bar caps/collar/cover
Needed for weather protecting the tub with the cover. I would recommend to print this out of ASA or PETG if no other coat is applied as it will be in the elements. Any help to remix this to make printing easier without supports would be…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
Sleds feet for Accu-Tac SR5 bipod clone
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
P
Printables
3D Printed Motion Sensor Case (ESP8266, USB-C, ESPHome, HC-SR501)
This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…
P
Printables
HC-SR501 PIR Human Motion Sensor
This enclosure is engineered for a precision fit around the standard HC-SR501 sensor module. Design & Material: The case features a minimalist cubic design, likely printed in PLA or PETG. The bright yellow color makes it highly visible…
P
Printables
Bewegungsmelder HC-SR501 Gehäuse MK1
http://www.amazon.de/Foxnovo-3V-5V-10DOF-9-Achsen-Attitude-Indicator-L3G4200D/dp/B00PRFPYI6?ie=UTF8&psc=1&redirect=true&ref\_=oh\_aui\_search\_detailpage Category: Other
P
Printables
Inner Lock trim for Toyota LiteAce/TownAce (SR40/SR50)
Inner Lock trim for Toyota LiteAce/TownAce (SR40/SR50) I maded for missing part of my car. It fits 3 doors - Driver, Passenger and Both Sliding Doors (if U Have more than one ) May be need some cuts at lower part to free side locks. v1 is…
P
Printables
Toolbox Yamaha SR500
Modified toolbox for Yamaha SR500 using the original lock. Differences to the original part: additional mounting holes for installation without the airbox hinge with axle instead of a film hinge Printing Printed in PLA, layer height 0.2…
P
Printables
Minimal Case for the IR-Sensor HC SR501
A minimalistic case for the Infrared-Sensor Module HC SR501 . Has holes to reach the trimmer for sensitivity and output pulselength. Print Settings Printer: FIashForge Dreamer Rafts: No Supports: No Resolution: 0.20 mm Infill: 100%…
P
Printables
Magnet Holder For SR501 Pir Sensor
I made a bed light where a sensor is used to detect movement, which should be located at the bottom of the bed, near the place where the legs go down. Over time, it became clear that this sensor was being knocked off its place by both the…
P
Printables
HC-SR501 PIR Human Motion Sensor
This enclosure is engineered for a precision fit around the standard HC-SR501 sensor module. Design & Material: The case features a minimalist cubic design, likely printed in PLA or PETG. The bright yellow color makes it highly visible…
P
Printables
Box for PIR motion sensor HC-SR501
A box for the PIR motion sensor HC-SR501 Opening for the 3-pins and for the two adjustment-screws see e.g. https://www.electrokit.com/en/pir-rorelsedetektor-hc-sr501 Check this out too ...
P
Printables
SR500 key replacement
I needed to replace a lost key on my 1980 Yamaha SR500. I was able to disassemble the ignition and remove the pin tumbler, measure it up, and model a replacement in Fusion 360. I don't actually need the security of the key, but I did need…
P
Printables
Toyota SR5 cup holder
Print with ASA filament as the environment is high temperature and high UV. Print upside down and there is a small cap to cover the hold down screw
P
Printables
SR501 Motion Sensor Case
This is a case to hold the SR501 Motion Sensor for prototyping/DIY projects. It snaps together and requires no glue. I made it to support my Inventr.io Projects. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…
P
Printables
TOOTHPASTE SQUEEZER ver tsr5
easy to print, smooth winding, simple ratchet mechanism with ratchet release so can unwind roll. smooth winding. just press and hold to lever to release ratchet to unwind. needs supports on the frame only
P
Printables
HC-SR501 PIR Sensor box
HC-SR501 PIR Sensor box. HC-SR501 IR Pyroelectric Infrared PIR Motion Human Sensor Detector for Arduino eBay Seller : dkjna_ltd Box bolts M3x5mm PCB mounting holes 2mm bolts Video on YouTube:
P
Printables
Wall mounts for SR505 PIR Sensors
Check the photos for a general idea of how I used them. I modded the original sensor to replace the pins with “turned-pin” female sockets. These sockets make it easier to plug in bare wires, which is what I had to work with. Printing can…
P
PrintablesTeasleyPrint
1990-1995 Toyota Sr5 Pickup/ 4runner Speaker Adapters
These prints are for 1990-1995 toyota trucks and 4runners. The front adapter is for the factory speaker enclosures that are in the dash, so you can use 4" speakers and make a good seal. You need to print 2 (and you many have to trim some…
- Likes
- 2
- Rating
- 0
P
Printables
Enclosure for HC-SR501 PIR sensor board
This simple enclosure is created for HC-SR501 PIR sensor board. It is specifically designed to blend seamlessly with the interior decor and to provide elegant solution for your security system sensors. The main goal was to combine ease of…
P
Printables
Case for HC-SR501
Case for the HC-SR501 Motion Sensor with 3mm Screwholes. Category: 3D Printing