HC-SR501 PIR ceiling case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dear makers, we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR501
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 340
- Makes
- 1
- Views
- 1,288
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Dear makers,
we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR501. Diameter of the installation hole is 44 mm. Housing includes lens cover, which can be glued to the housing, enabling to reduce the angle from the sensor's PIR from 360° to about 180° degrees.
Use two 2x4mm screws for fixing.
We tested with PETG due to higher temperature resistance for electronics. Feel free to customize and upgrades!
Installation video: https://www.youtube.com/watch?v=GK7Lr0WwjkM
Don't have a 3D printer? You can order part here: https://opentux.eu/produkt?pn=OPH015EN
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Plasty Mladec PETG White
Category: Electronics