HC-SR501 PIR ceiling case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dear makers, we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR501
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 340
- Wydruki
- 1
- Wyświetlenia
- 1288
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Dear makers,
we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR501. Diameter of the installation hole is 44 mm. Housing includes lens cover, which can be glued to the housing, enabling to reduce the angle from the sensor's PIR from 360° to about 180° degrees.
Use two 2x4mm screws for fixing.
We tested with PETG due to higher temperature resistance for electronics. Feel free to customize and upgrades!
Installation video: https://www.youtube.com/watch?v=GK7Lr0WwjkM
Don't have a 3D printer? You can order part here: https://opentux.eu/produkt?pn=OPH015EN
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Plasty Mladec PETG White
Category: Electronics