HC-SR501 PIR Motion Sensor Housing (w/ moisture seals)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a motion sensor housing originally designed for Halloween decor motions sensors. The mounting holes inside the…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a motion sensor housing originally designed for Halloween decor motions sensors. The mounting holes inside the enclosure are for a custom designed PCB breakout board. The cable seals are sized to pass through cat6 cable.
Hardware:
- HC-SR501 PIR Motion Sensor
- (Qty 8) M3 x 10mm
- (Qty 2) #8 x 1/2" Sharp Point Lath Screws
- 3M VHB 4910 Heavy Duty Mounting Tape
Note: To attach the sensor side shield to the housing apply the VHB tape to the base of the shield.
Check out our Wiki for more details on other Halloween décor information.
Print Settings
Printer:
Lulzbot Taz Clone
Rafts:
No
**Supports:**
Yes
Resolution:
0.40
**Infill:**
30%
Filament: IC3D UV-PETG Black
Notes:
Seals are printed in TPU / Cheetah.
Category: Electronics
