1 / 5
Aprilia SR50 Old (1992–1997) – Frame Number Cover / Inspection Hatch — image 1
1 / 5

Aprilia SR50 Old (1992–1997) – Frame Number Cover / Inspection Hatch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Frame Number Cover for Aprilia SR50 Old

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
46
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Public Domain

Is the frame number cover / VIN hatch missing on your classic Aprilia SR50 Old (first generation, manufactured from 1992 to 1997)?

Since these original plastic parts are virtually impossible to find or often broken, I 3D-modeled a custom replacement cover that fits into the leg shield / inner fairing to cover the chassis number.

Print Settings & Recommendations

  • Material: PETG, ASA, or ABS is highly recommended. Standard PLA might deform under hot summer sun or outdoor weather conditions.

  • Layer Height: 0.2 mm (or 0.16 mm for a smoother finish)

  • Infill: 20% - 30% (Grid or Gyroid)

  • Supports: Depending on your printer's bridging capability and orientation, minimal supports might be needed around the mounting tabs.

  • Wall Loops / Perimeter: 3 - 4 walls for strength around the retention clip/tabs.

Compatibility

Fits the first-generation Aprilia SR 50 models (vertical Minarelli / Morini engines), including:

  • Aprilia SR 50 (1992–1994)

  • Aprilia SR 50 Urban Kid / VIP / Replica (1994–1997)

> Note: Does not fit the later SR50 WWW, Stealth, Netscaper, or Factory models (SR50 Second Gen / SR50 R) as their fairing shapes differ.

Feedback & Remixes

If you printed one, please leave a Make or post a photo! Feedback is always welcome to improve the design. Enjoy keeping your vintage scooter complete! 🛵💨

Tags