Search results: sr50

Counting matching models…

PIR HC-SR501 Case

This is a case for your PIR sensor. It fits perfectly into the case. Have fun :)

Downloads: 632
Likes: 47
Rating: 4.88

HC-SR501 (SR501 / SR-501) PIR Sensor Tiny Case w/ Snaps

Smallest possible case for the HC-SR501 PIR with snaps, mounting posts and indexing notch. Screws or tape mount to wall.

Downloads: 485
Likes: 33
Rating: 5

Order a print of this model

PrintablesHouse3D

PIR HC-SR501 Housing Without Extension

Remix of the HC-SR501 with extension. I removed the back but included a slight gap in the back for cable to run through. Print Settings Printer: REPRAP Samuel Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 40% Category:…

Downloads: 423
Likes: 17
Rating: 5

Order a print of this model

Printablesopentux

HC-SR501 PIR ceiling case

Dear makers, we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR501. Diameter of the installation hole is 44 mm. Housing includes lens cover, which can be glued to the housing, enabling to reduce the angle from…

Downloads: 340
Likes: 23
Rating: 5

Order a print of this model

PrintablesManelTo

PIR HC-SR501 (step format)

An HC-SR501 PIR component in step format for use in your own designs.

Downloads: 307
Likes: 13
Rating: 0

Order a print of this model

Printablesclement0635

Support and enclosure for HC-SR501 motion sensor module

This enclosure is designed to fit perfectly an HC-SR501 motion sensor module such as this one .

Downloads: 261
Likes: 26
Rating: 5

Order a print of this model

Printables3D Try Outs

HC-SR501 PIR Sensor box

HC-SR501 PIR Sensor box. HC-SR501 IR Pyroelectric Infrared PIR Motion Human Sensor Detector for Arduino eBay Seller : dkjna_ltd Box bolts M3x5mm PCB mounting holes 2mm bolts Video on YouTube:

Downloads: 214
Likes: 8
Rating: 0

Order a print of this model

PrintablesA-maze-1ng

PIR sensor housing with movable mount (HC-SR501)

For my project I needed a articulated mount for the HC-SR501 PIR senor. The base plate can be attached with M3 wood screws. The coupler needs to print with support. What you need: 4x M3 heat insert (I used M3x5.7mm) 4x M3x8 screw 3x M3x12…

Downloads: 187
Likes: 18
Rating: 5

Order a print of this model

PrintablesRitchbitch

Intake Funnel ø62mm for Mikuni VM36-4 as sold for Yamaha SR500 XT500 TT500

Intake Funnel with ø62mm inner diameter. Source files included. For Mikuni VM36-4 as sold by Kedo.

Downloads: 179
Likes: 19
Rating: 0

Order a print of this model

Printablesbeerman

PIR Motion Sensor - WEMOS D1 Mini + HC-SR501 - Philips Hue

After making one of Qrome's awesome print monitors I noticed how similar in size the OLED module and a PIR sensor I had to hand were. So instead of reinventing the wheel and creating a new body for the motion sensor I remixed Qrome's…

Downloads: 164
Likes: 17
Rating: 5

Order a print of this model

PrintablesScott Gibb

HC-SR501 PIR Sensor Case

HC-SR501 PIR Sensor Case This thing is a simple bolt-on case for the HC-SR501 PIR Sensor, the case is designed so that it can slide onto my Panasonic TV and face the rest of my room. The case was designed using an open source step file…

Downloads: 149
Likes: 10
Rating: 0

Order a print of this model

Printablesopentux

DHT22 + HC-SR501 PIR ceiling case

Dear makers, we would like to share our ceiling case for DHT22 sensor, together with PIR Arduino compatible sensor HC-SR501. Use two 2x4mm screws for fixing PIR. Drill hole 67 mm. We tested with PETG due to higher temperature resistance…

Downloads: 121
Likes: 17
Rating: 0

Order a print of this model

PrintablesChris Twomey

HC-SR04 + HC-SR501 Casing + Angle Adjustable Cradle

Remix from https://www.thingiverse.com/thing:1799012 Allows housing for both HC-SR04 and HC-SR501 for when you need both motion and distance detection. It also fits a small microcontroller in the rear, though you will need to use glue or…

Downloads: 107
Likes: 14
Rating: 0

Order a print of this model

Printablesplanetar

Case for ESP32, PIR HC-SR501, 0,96 I2C Display and 2 more sensors

This is an enclosure for 3 sensors, a display and a ESP32 to run them all. It has quite some volume and a lot of air vents and it keeps the sensors in pockets that can be sealed with a bit of gum to keep the influence of waste heat within…

Downloads: 100
Likes: 8
Rating: 0

Order a print of this model

PrintablesIra S

PIR HC-SR501 IR Sensor Enclosure for Arduino and Raspberry Pi

Small enclosure for a HC-SR501 PIR Infrared Sensor. Enclosure includes notch for use with a small cable tie to secure the cable so it won't pull out. Additional hole below the sensor hole is for an optional LED if you want to add one to…

Downloads: 94
Likes: 11
Rating: 0

Order a print of this model

Printablesxperts_avenue

Abdeckung Steuerkopf Simson S50 S51 S53 SR50

🇩🇪 Beschreibung (Deutsch) Abdeckung für einen Steuerkopf einer Simson S50, S51, S53 oder SR50 , wenn keine Bowdenzüge durch den Steuerkopf geführt werden müssen. Die Abdeckung wird idealerweise aus TPU gedruckt, sodass sie sich dank des…

Downloads: 89
Likes: 14
Rating: 0

Order a print of this model

PrintablesMark B

Wemos D1 mini with shield, PIR (HC-SR501), DHT22 and 3 leds

Holder for D1 Mini with shield and LEDs. Optional separator that can be wrapped in Aluminium foil to provide additional shielding

Downloads: 72
Likes: 4
Rating: 0

Order a print of this model

PrintablesChristian Fornes

Master volume knob Onkyo TX-SR501E

50mm OD 27mm Tall Volume knob for 6mm potentiometer shaft.

Downloads: 57
Likes: 5
Rating: 0

Order a print of this model

PrintablesKiDChaos

Yamaha SR500 Sidecover rubber

- damper for Sidecovers for the Yamaha SR500 and SR400 - in complete you need four of these - best print in TPU to get some dampening effect (#goodVibrations) :)

Downloads: 54
Likes: 8
Rating: 0

Order a print of this model

Printablesebarnes

SR501 Motion Sensor Case

This is a case to hold the SR501 Motion Sensor for prototyping/DIY projects. It snaps together and requires no glue. I made it to support my Inventr.io Projects. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…

Downloads: 50
Likes: 3
Rating: 0

Order a print of this model

PrintablesBantje_k

3D Printed Motion Sensor Case (ESP8266, USB-C, ESPHome, HC-SR501)

This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…

Downloads: 45
Likes: 7
Rating: 0

Order a print of this model

PrintablesPistonPin

Spacer to fit a PZ16 carburetor on a NSR50

I'm on and off tinkering on my NSR50 project bike. I want it to be as stock as possible, but original carburetors are surprisingly hard to come by (or ridiculously expensive), so as a temporary solution I designed this custom spacer to…

Downloads: 40
Likes: 6
Rating: 0

Order a print of this model

PrintablesNotLikeALeafOnTheWind

8020 mount HC-SR501 Infrared Distance Sensor w-cable tie start v2

A mount for an HC-SR501 sensor with cable ties. The mount may be used stand alone or mounted to an 8020 series 10 extrusion. Print instructions Unassociated tags: infrared sensor mount Category: Electronics

Downloads: 33
Likes: 3
Rating: 0

Order a print of this model

PrintablesSektor 7 Studios

SIMSON SR50 STRING-ART / DECORATION

Hello everyone :) Attention SIMSON SR50 fans. I have designed a very cool string art stand with SIMSON SR50 LOGO for you. Both the stand and the SIMSON SR50 string art are very easy to print and use very little filament. The principle…

Downloads: 30
Likes: 8
Rating: 0

Order a print of this model

PrintablesWilliam Arsenault

Aprilia SR50 Air Intake Adapter

Air intake adapter for the aprilia SR50 Moped. This adapter allows you to fit dirtbike and moped cone filters onto the moped. Its supported from one of the screws holding in the wheel cover.

Downloads: 24
Likes: 7
Rating: 0

Order a print of this model

PrintablesTadeas.Grohmi

HC-SR501 PIR sensor case

There is hole for some cables and also there is space for neodymium magnet. Im using esp8266 and ESPhome. Made for wall mounting

Downloads: 24
Likes: 0
Rating: 0

Order a print of this model

PrintablesMichaelW

Aprilia SR50 Factory DITECH DI-TECH fuel pump service stands and tool

These are stands and tools to work on your aprilia SR50 fuel pumps! The round part with the square hole can be used to lightly tap down on the fuel pump cover to help work in some silicone lubricant for removal. The stands just help you…

Downloads: 18
Likes: 2
Rating: 0

Order a print of this model

PrintablesRene Berthold

Case for HC-SR501

Case for the HC-SR501 Motion Sensor with 3mm Screwholes. Category: 3D Printing

Downloads: 17
Likes: 1
Rating: 0

Order a print of this model

PrintablesMalaMaker

HC-SR501 PIR Motion Sensor Housing (w/ moisture seals)

This is a motion sensor housing originally designed for Halloween decor motions sensors. The mounting holes inside the enclosure are for a custom designed PCB breakout board. The cable seals are sized to pass through cat6 cable. Hardware:…

Downloads: 15
Likes: 4
Rating: 0

Order a print of this model

PrintablesBlitzbakwa

Audio Technica ATH-SR50 BT Headband Attachment Replacement

Replacement part for the headphone attachment. Uses the original screws. Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No **Filament:** Generic PETG Category: Audio

Downloads: 15
Likes: 0
Rating: 0

Order a print of this model

PrintablesSaufziege

Ersatz-Gabelabdeckung (TPU) - Kompatibel mit Aprilia SR50 / Piaggio Group (OEM AP8217034)

Dies ist eine zurückentwickelte (Reverse Engineered) Abdeckung, die vom Originalteil nachgezeichnet und für den 3D-Druck optimiert wurde. Es handelt sich um den "Front Fork Lower Closing" (Piaggio U. Verschl. Gabel) , der in der…

Downloads: 12
Likes: 0
Rating: 0

Order a print of this model

Printablesblalor

SR500 key replacement

I needed to replace a lost key on my 1980 Yamaha SR500. I was able to disassemble the ignition and remove the pin tumbler, measure it up, and model a replacement in Fusion 360. I don't actually need the security of the key, but I did need…

Downloads: 12
Likes: 3
Rating: 0

Order a print of this model

PrintablesOldschool

Yamaha SR500 damper instruments

- replacment dampers for the instruments - slicer: Cura - printing material: Generic TPU Nozzle 220°C, Bed 50°C - printing orientation: flat, not supports

Downloads: 11
Likes: 2
Rating: 0

Order a print of this model

PrintablesOldschool

Yamaha SR500 damper for backlight holder

- replaces rubber damper between fender and backlight - slicer: Cura - printing material: Generic TPU Nozzle 228°C, Bed 0° - printing orientation: flat with support

Downloads: 6
Likes: 0
Rating: 0

Order a print of this model

PrintablesSchweller3D

Aprilia SR50 Old (1992–1997) – Frame Number Cover / Inspection Hatch

Is the frame number cover / VIN hatch missing on your classic Aprilia SR50 Old (first generation, manufactured from 1992 to 1997)? Since these original plastic parts are virtually impossible to find or often broken, I 3D-modeled a custom…

Downloads: 4
Likes: 0
Rating: 0

Order a print of this model

Printables

I made a bed light where a sensor is used to detect movement, which should be located at the bottom of the bed, near the place where the legs go down. Over time, it became clear that this sensor was being knocked off its place by both the…

Order a print of this model

Printables

This simple enclosure is created for HC-SR501 PIR sensor board. It is specifically designed to blend seamlessly with the interior decor and to provide elegant solution for your security system sensors. The main goal was to combine ease of…

Order a print of this model