HC-SR04 + HC-SR501 Casing + Angle Adjustable Cradle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix from https://www.thingiverse.com/thing:1799012 Allows housing for both HC-SR04 and HC-SR501 for when you need…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 107
- Makes
- 0
- Views
- 823
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Remix from https://www.thingiverse.com/thing:1799012
Allows housing for both HC-SR04 and HC-SR501 for when you need both motion and distance detection. It also fits a small microcontroller in the rear, though you will need to use glue or blu tack to fasten it down. The microcontroller I used was the TinyS3 but any microcontroller of similar size will work: https://esp32s3.com/tinys3.html
I used this for a project that allowed me to make my office smart lights stay active, only when I was at my desk: https://github.com/chrisjtwomey/esp32-motion-lifx
If you wish to mount this to a monitor, I suggest printing the following parts:
- FOR_MONITOR-monitor-mount.stl
- need to be adjusted depending on the depth of your monitor.
- glue to the bottom of the monitor cradle
- FOR_MONITOR-cradle.stl
You can tweak the files for yourself here https://www.tinkercad.com/things/hxcDVDLWbq1
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.16
Filament:
eSun PLA+Black
Notes:
Use supports:
* front.stl * rear.stlI suggestUse Adaptive Layers if slicing with Cura or 0.16mm layer height to avoid stair-stepping along the curves as much as possible.
Category: 3D Printing