119 models
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
Aprilia brand keychain, with a simple and easy design for a quick impression and low material cost.
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
Small storage compartment for Aprilia Tuareg 660 that can be installed next to the lithium battery. Suitable for model year 2026. Maybe also 2025? Perfect for storing insurance papers (and some tiny tools). The box doesn't have any lid…
Aprilia - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Aprilia Racing is a motorcycle racing factory team of competing in the MotoGP World Championship owned by Aprilia, subsequently by the Piaggio Group.…
This part is design to prevent incidentally pushing high beam switch in Aprilia Tuareg 660 motorcycle.
Aprilia brand keychain, with a simple and easy design for a quick impression and low material cost.
This is a remix for Aprilia RSV motorcycle fans Phone stand: v1-1 is suitable for devices with a total thickness up to 10mm v2-1 is more stabile and suitable for devices with a total thickness up to 16mm all versions with cut-outs for:…
Aprilia RS660 Side Winglet. Print in Place
Ich habe hier einen Schlüsselanhänger für aprilia Fans entworfen. Die Anhänger können in beliebiger Farbe gedruckt werden. Die Schlüsselahänger können schnell und einfach gedruckt werden. kein Support Layerhöhe 0,2mm verschiedene Farben…
On AliExpress and other places you can find a waterproof 5 inch touch screen with wireless CarPlay for motorcycles - this thing here . This is my mount for the navigation bar of my Aprilia Tuareg 660. Two pieces: One gets screwed to the…
Print one of these and keep it under the seat of your bike. Next time you have to park on dirt, you won't have to worry about the kickstand sinking into the dirt and dumping your bike. I created the logo @ 3 different depths. So, for the…
M10 Screw for hide that I have removed my Tuono V4 mirrors. CAUTION : Use oil before insert it. If you destroy the screw you will have a bad time while remove it.
Model of a Piston Aprilia RSV Mille 2002 RP. Tried to print in Silver Silk PLA but still strugglin with orientation
The holder flange to fix the side mirror at a Aprilia RSV Mille Flansch zum befestigen des Seitenspiegels einer Aprilia RSV Mille Category: Gadgets
LEGO Lancia Aprilia Cabriolet 1948
Aprilia Classic - Key chain - Portachiavi - Porte Clès - 钥匙链 13/05/2025 Update Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their…
These are simple plates to block off the area where the mirrors were if you remove them for track days or bar end mirrors. The countersunk version is meant to be used with 6mm countersunk fasteners. The buttonhead version is meant to be…
Some 3D printer models for Aprilia Tuono V4 1100 / RSV4 footpeg remover cover. This for 2015+ models. There is two models since the model isn’t fully symetrical. Also you have the Fusion 360 models for learning purpose. Be carefull if…
Description Knobs to easily mount the saddle of your Derbi, Aprilia or Gilera moped without the need of any tools! Two knobs needed for one moped. Aditional required hardware A hex M5x20mm bolt is needed per knob. Backstory I made this…
A M5x15-20mm bolt is needed I printed in PETG Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Infill: 30 Filament: GEEETECH PETG Green Notes: you can adjust it yourself i put the…
Print with flexible filament with 100% infill.
I made a waterpump for my Aprilia RS125 Racebike. It has a groundplate for better flow and more stability. I printed it out of very well dried nylon. (Easynylon from Overture) printed slowly with a ,6 nozzle. I tested it on my racebike…
It's a Crutch pad for Aprilia Tuareg 660. It prevents leaving traces of aluminum on the ground and protects the aluminum stand. Fixing by adjustment. Print at a pitch of 0.4 in PETG or ASA. C'est un patin de béquille pour aprilia Tuareg…
Das Modell ist ein Schlüsselanhänger in Form eines Mopeds mit Schriftzug. Bei der fertigen Datei sind bereits passende Farbwechsel integriert, wenn diese nicht gewollt werden oder ein anderes Filament (z.B. PETG) gewählt wird, kann man…
Print with TPU 5% Triangle infill
If you remove your passenger pegs you can bolt this in place to cover the holes. Needs 8mm socket head bolt to hold in place, the stock passenger peg bolts are too long and won't work. I suggest printing this upside down with supports,…
Mine was worn down to almost nothing, so I made new one, slightly redesigned for 3D printing. Would recomend prining with 999 walls for better abrasion profile. Part number AP8158669.
when you remove the original plate support a void is created at the wheel arch and this part fills it made it via F360 tested and validated on mine ;)
A remix of the well known Maker World Clock for all Aprilia fans. If you need to buy the clock part on the net just make sure it has a thread length of 13mm. Want more clock designs? Have a look into our DECORATION collection . [UPDATE]:…
Adapter to use the original hexagonal screw at the end of the bar and directly mount a mirror (espacially Highsider Evo). You also get some space and lower to risk to damage your tank with the mirror when falling aside. Material has to be…
This is the chain roller for Aprilia AF1 models, it may also be suitable for other models. Intended for printing from TPU. For high durability, print at least 3-4 wall lines. Das hier ist die Kettenrolle für Aprilia AF1 Modelle,…
Compatible with: GiamaicaWorx Front Rack System (Front Rack + Device Holder) 🔗 https://www.giamaicaworx.com/front-rack-system/ If you're mounting a DMD T865, T880 using the road/adventure holder, there's also a adapter model for that: 🔗…
Placchette copri fori Gilera Nexus 300 / 500 - Aprilia SR Max 300 - Malaguti Madison 300 Stampa in PETG, ABS o PLA+ No supporti
These are pretty standard in motorcycles to mount plastic fairings. 8.5mm inner diameter makes it just a touch tighter than original providing a snug but not too tight fit. Printed in Bamboo TPU HF on P1S printer 50% gyro infill but I…
I have a TaoTao Pony with the GY6 engine. I'm doing a knock-off Aprilia theme, so there is an option here for that. I have included STEP files, so you can customize to your application. Mine was a press-fit into the container, but you can…
Print with TPU 100% infill. Enabling “make overhangs printable” in slicer may help with quality. Hollow type is designed to be used with handguards.
Replacement cruise control switch for the Aprilia Tuareg 660 (Tested on 2025 Rally pn: 2D000549). The OEM plastic switch breaks easily and is not available as a separate spare part requiring replacement of the entire control assembly.…
This is an adapter I designed to fit an Antigravity ATZ-10 Lithium-Ion battery in the same space previously occupied by a Yuasa YT12A-BS. The shape is a little odd, but I made it that way to reduce the number of supports required during…
Samsung A52 phone holder for mounting on an Aprilia Tuareg 660 2023 motorcycle. V2: Adding Cameras windows, buttons accès and wire accès.
Motorcycle keychain with RS 125 aprilia theme
On/Off Switch Size: Length: 30.40mm Width: 10.32mm koso temperature display: https://www.amazon.de/KOSO-BA024B10-Super-Slim-Stil-Thermometer/dp/B00UMTOINO PLA ~60% Infill 0,2 Layer
English : remix de https://www.thingiverse.com/thing:6168131 , having several Givi bags, I created an adapter to shift the Givi Tanklock attachment on the tank of the Aprilia Tuono (or RSV), while taking the Givi support of the tank cap.…
This is a block off plate for the front turn signals on a USA-spec Aprilia RS457. If you remove the front signals you can bolt this plate in place of the missing stalk using a 6mm nut. These do not have to be very tight, just enough to…
This Aprilia RSV4 Factory scale model is a detailed 3d printable super sports motorcycle stl for collectors searching for “aprilia rsv4” or “rsv4 factory” model files. Made for display stands, desk and tabletop dioramas, garage-themed…
So this is a side view of my Aprilia RS125 racebike. The backwheel spokes are in the backwards direction, because my racebike has a honda wheel in backwards :)
I recommend printing them so that the seam is facing the ground once mounted.
Mirror delete/blindplates Aprilia RSVMille '98/'03, to remove the mirrors (for racing etc.) but don't leave the bodywork with ugly holes in it.
This is a RAM mount that attaches to the steering stem nut. It uses an 8mm RAM ball that is sold/intended to be used with the handlebar clamp. An STL for the RAM ball and shaft are not included, I used one I had sitting around, but may…
English : remix of https://www.thingiverse.com/thing:6188199, I modified the general design and at the level of the gas door to better be able to fold the lock cover when wearing the gloves. Français : remix de…
It works, printed with TPU 85A, 15% infill. Less infill, softer it is.
English : small cover for those who ride without the passenger footrest support for Tuono and RSV Gen1 Français : petit cache pour ceux qui roule sans les platines repose pied passager pour Tuono et RSV Gen1 Print Settings Printer Brand:…
Peg Slider for OEM Aprilia XV footpegs used on MXV, SXV & RXV, designed to be rotated 180 degrees when it wears. Print Settings Printer Brand: Raise3D Printer: N2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.25 Infill: 35 Filament:…
This adapter is specifically designed to make the Givi BF25 tank lock system compatible with the Aprilia Tuareg 660 . It serves as a bridge between the bike's tank and the Givi flange. ⚠ IMPORTANT INSTALLATION NOTES: Screws: To install…
Fork cap spanner for Aprilia SXV forks that have a 10 sided cap 49.6 Across Flats Print Settings Printer Brand: Raise3D Printer: N2 Rafts: No Supports: No Resolution: 0.25 Infill: 35% Notes: Printed using 5 walls with 0.4 Nozzle Category:…
Diesen Öltankdeckel habe ich entworfen, da der originale bei mir nach der Zeit etwas zu locker sitzt und immer abfällt. Es ist eine simple Konstruktion und sitzt etwas enger als der originale, sodass er nicht so leicht verloren geht. Der…
Passend für Aprilia AF1 Futura/SportPro sowie Aprilia RS125 Federgabeln. Der Schutz ist Konstruiert um die Federgabel für den Service in den Schraubstock zu spannen ohne sie zu verformen oder zu beschädigen. Es passt perfekt auf die Gabel…
I found best slicer settings are .4 nozzle .2 layer height 30 % infill 4 walls and top and bottom layers, line pattern
ENGLISH Battery fixing plate for Aprilia RSV 1000 1999/2003 and Tuono 1000 2002/2005 for battery YUASA YTX14-BS (which is higher than the YTX12) FRANCAIS Fixation de batterie pour Aprilia RSV 1000 1999/2003 et Tuono 1000 2002/2005 pour…
Llavero basado en la Scooter Aprilia SR GT 125-200 configurable para imprimir en 2 colores con AMS
This Aprilia RSV4 scale model STL is a detailed 3d printable sport motorcycle model for collectors, dioramas, and display pieces. Print it for a desk or shelf showpiece, a model-building project, or a themed garage and racing diorama. The…
unscrew the two mounting bolts for the passenger footpads and use the same bolts to mount this to attach straps or bungees to secure items to the seat of the motorcycle. Countersunk holes prevent snags.
English : Aprilia RSV 1000 rear-view mirror wedge to raise them (2, 4, 6, or 8 cm) for better visibility, RSV and Tuono compatible. To protect the fairing, I glued a 1mm thick self-adhesive black foam at the base of the extensions.…
Distanziali Carena per Aprilia RS 125 AF1 – Codici AP8121867 Stampare in ABS o ASA per una maggiore tenuta meccanica o in alternativa in TPU per assorbimento vibrazioni carena
I printed in polycarbonate blend. Fits perfectly and just a small drop of glue. I have added shorter versions that fit better with my tools at least ;)
Air intake adapter for the aprilia SR50 Moped. This adapter allows you to fit dirtbike and moped cone filters onto the moped. Its supported from one of the screws holding in the wheel cover.
This will cover the hole left in the fender when you remove the reflector. Attach with a 6mm nylock nut over a washer. Be careful not to over tighten, it only needs to be tight enough that it doesn't spin. Blank version has nothing on the…
I used aluminium tape to line the box: https://www.amazon.co.uk/dp/B018KEHB22?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2 and a 1-metre LED string for lighting:…
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
This is a brake gasket set for an Aprilia Tuareg 50 motorbike. I designed this gasket set because a brake cylinder rebuild kit is not available. This kit is for a hand brake rebuild. The parts have to be printed with NinjaFlex or a…
These are stands and tools to work on your aprilia SR50 fuel pumps! The round part with the square hole can be used to lightly tap down on the fuel pump cover to help work in some silicone lubricant for removal. The stands just help you…
ENGLISH Rear headlight cover for Aprilia RSV 1000 and Tuono, ultra slim version (9.8 mm high), printed in translucent PETG. FRANÇAIS couvercle de phare arrière pour Aprilia RSV 1000 et Tuono, version ultra slim (9.8 mm de haut), imprimé…
The main sections bolt on where the passenger pegs are supposed to go. The rear brace needs a small hole drilled in the tail section for the bolt that holds it on. I printed this with a carbon fiber infused nylon filament. I printed this…
Es handelt sich um eine Nachbildung des klassischen Gummipuffers als 3D-Modell. Material: Zwingend TPU verwenden (kein PLA/PETG!).
Passend für Aprilia AF1 125 Futura und Sport Pro, um die Kabel der Blinker zu schützen. Die Kabeldurchführung muss aus TPU gedruckt erden. Je weicher, desto besser. Suitable for Aprilia AF1 125 Futura and Sport Pro to protect the…
Beautiful and very easy to print. A unique Aprilia key ring
English : I created this adapter for my Givi EA131 bag for my Aprilia Tuono Gen1 motorcycle, it allows you to shift forward the saoche and avoid having it in the belly. The adapter is fixed with 6 4x30mm screws, and the Givi locking…
I didn't like to mount my phone on the bars or above the dash therefore created this beefy blinker stalk to attach the RAM clamp just above the usb charging port. Have at least 3000 offroad miles on it at this point with zero issues and…
It is a prototype for the flyhammer crashpad. Replacement. I wouldn't use it as an actual crashpad as a 3d print.
bar ends for bike, work with almost every bike who's bar finish in M5. personally i have the Rs 125 2025. i didn't put values for the printing, because i'm new and i think that you know better than me how to do it properly
Background The design was originally intended to be made from aluminium — and it still works perfectly that way. The geometry is simple enough that it can also be done with basic hand tools and a drill press, no CNC or mill required.…
Ok let's be honest, when it comes to fastening bodywork and other bits, Aprilia makes some pretty dumb choices. For example - if you try to remove the mirrors for a trackday or whatever, you will discover that the nuts drop down behind…
I've had 2 crashes now on track. Both times the vulnerable connectors were destroyed which can be a pricey replacement. I printed these parts lying down with PA12-CF with 4 perimeters and 50% infill 0,1 layer height, support needed i…
Printed in ABS This is for the small headlight switch and is handed for the left side. The support fits Verlicchi levers as fitted to many early 70s Italian bikes Fitted to a Gilera Arcore 125
Dies ist eine zurückentwickelte (Reverse Engineered) Abdeckung, die vom Originalteil nachgezeichnet und für den 3D-Druck optimiert wurde. Es handelt sich um den "Front Fork Lower Closing" (Piaggio U. Verschl. Gabel) , der in der…
Exhaust blanking plate to suit Aprilia XV engines (SXV, RXV, MXV), use this is you want to clean your engine without the exhaust fitted or store a spare engine. Exhaust boss is 38.0mm (~1.5") x 9.0mm long and the flange mounting holes are…
A multi-colour Aprilia Racing coaster printed in PETG. 15% infill 0.2mm layer height 0.4mm nozzle
Fits the following models: AF1 FUTURA 125 AF1 FUTURA 50 EUROPA 50 PEGASO 125 PEGASO 600 Pegaso 650 RS 125 - Body (1995) RS 125 (eng.122cc) RS 125 (eng.123cc) RS 50 RS 50 Tuono
Adapter zur Anbindung von Lenkerendspiegeln an der Aprilia Tuono V4 Euro 5. Durchmesser 30mm.
During the years of use the cover of my scooter key was damaged. Thanks to my 3D printer and FUSION 360 I made a new one!!! Print it with ASA or ABS and 25% infill for better results and durability. Shortly I will upload a newer version…
This is a camera mount that is intended to go over the mirror for a front mounted camera. I printed it a year ago and still haven't mounted it because it takes very long fasteners to reach through the mount and the mirror. Because I…
I made the Hymec work for the SXV. So I write here for others in the future who want to do this as well. 1. You need Magura Hymec 2100005 (this has a cylinder for 51-53mm working stroke). The SXV has 49mm and Magura says you should take…
