1 / 3
Forkclamp Aprilia RS125, AF1 125 Futura/SportPro — image 1
1 / 3

Forkclamp Aprilia RS125, AF1 125 Futura/SportPro

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clamp for Aprilia AF1 Futura/SP and RS125 to clamp the suspension fork in the vice without deforming or damaging it.

Rating
0 / 5
Likes
5
Downloads
31
Makes
0
Views
235
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Passend für Aprilia AF1 Futura/SportPro sowie Aprilia RS125 Federgabeln.

Der Schutz ist Konstruiert um die Federgabel für den Service in den Schraubstock zu spannen ohne sie zu verformen oder zu beschädigen. Es passt perfekt auf die Gabel an der Klemmstelle der unteren Gabelbrücke. 

Es sollte stabil gedruckt werden, um nicht zerquetscht zu werden. Ich empfehle 0.2mm Layerhöhe, mindestens 4 wandlinien, 6 obere und untere Schichten ,20% Gyroid Infill und etas stabileres als PLA zu verwenden.

 

Suitable for Aprilia AF1 Futura/SportPro and Aprilia RS125 suspension forks.

The protection is designed to clamp the suspension fork in the vice for service without deforming or damaging it. It fits perfectly on the fork at the clamping point of the lower triple clamp.

It should be printed stably so as not to be crushed. I recommend using 0.2mm layer height, at least 4 wall lines, 6 top and bottom layers, 20% gyroid infill and something more stable than PLA.

 

Tags