1 / 5
Aprilia SR50 Old (1992–1997) – Frame Number Cover / Inspection Hatch — zdjęcie 1
1 / 5

Aprilia SR50 Old (1992–1997) – Frame Number Cover / Inspection Hatch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Frame Number Cover for Aprilia SR50 Old

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Is the frame number cover / VIN hatch missing on your classic Aprilia SR50 Old (first generation, manufactured from 1992 to 1997)?

Since these original plastic parts are virtually impossible to find or often broken, I 3D-modeled a custom replacement cover that fits into the leg shield / inner fairing to cover the chassis number.

Print Settings & Recommendations

  • Material: PETG, ASA, or ABS is highly recommended. Standard PLA might deform under hot summer sun or outdoor weather conditions.

  • Layer Height: 0.2 mm (or 0.16 mm for a smoother finish)

  • Infill: 20% - 30% (Grid or Gyroid)

  • Supports: Depending on your printer's bridging capability and orientation, minimal supports might be needed around the mounting tabs.

  • Wall Loops / Perimeter: 3 - 4 walls for strength around the retention clip/tabs.

Compatibility

Fits the first-generation Aprilia SR 50 models (vertical Minarelli / Morini engines), including:

  • Aprilia SR 50 (1992–1994)

  • Aprilia SR 50 Urban Kid / VIP / Replica (1994–1997)

> Note: Does not fit the later SR50 WWW, Stealth, Netscaper, or Factory models (SR50 Second Gen / SR50 R) as their fairing shapes differ.

Feedback & Remixes

If you printed one, please leave a Make or post a photo! Feedback is always welcome to improve the design. Enjoy keeping your vintage scooter complete! 🛵💨

Tagi