1 / 5
V6 Nozzle Snap-On Holders for V-Slot 2020 — zdjęcie 1
1 / 5

V6 Nozzle Snap-On Holders for V-Slot 2020

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modular V6 nozzle holder that can snap on V-Slot 2020.

Ocena
5 / 5
Polubienia
63
Pobrania
243
Wydruki
7
Wyświetlenia
955
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A modular system for holding V6 nozzle with “Snap-On” features that compatible with 2020 V-Slot aluminium profile. This system design to take benefit of material flexibility, thin wall structures as flexible legs to grab the profiles. The nozzle holder work as a simple tight-fit hole that you can wrench the nozzle in. The upper and lower wings are snap holder and can use as labels (write on) or emboss texts.

 

Printing Guide

To prevent too much heat printed in small section of layer. I prefer to use “all-perimeter” printing by add up number of your perimeter to maximum of your extrution width (my case 0.4mm set to 5 walls) with no small gaps fill.

Material:  PLA, PTEG, ABS, PC, etc
Layer height:  0.1 to 0.2 mm
Nozzle: 0.4 mm
Perimeter: >5
Infill: None
Fill gaps:  None
Supports:  None
Skirt/brim:  None

Tagi