V6 Nozzle Snap-On Holders for V-Slot 2020
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular V6 nozzle holder that can snap on V-Slot 2020.
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 243
- Makes
- 7
- Views
- 955
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike

A modular system for holding V6 nozzle with “Snap-On” features that compatible with 2020 V-Slot aluminium profile. This system design to take benefit of material flexibility, thin wall structures as flexible legs to grab the profiles. The nozzle holder work as a simple tight-fit hole that you can wrench the nozzle in. The upper and lower wings are snap holder and can use as labels (write on) or emboss texts.

Printing Guide
To prevent too much heat printed in small section of layer. I prefer to use “all-perimeter” printing by add up number of your perimeter to maximum of your extrution width (my case 0.4mm set to 5 walls) with no small gaps fill.
Material: PLA, PTEG, ABS, PC, etc
Layer height: 0.1 to 0.2 mm
Nozzle: 0.4 mm
Perimeter: >5
Infill: None
Fill gaps: None
Supports: None
Skirt/brim: None
