1 / 6
Mandalorian Helmet – X-Sense X501-M Smoke Detector Mount for 3D Printer Enclosure (Remix) — zdjęcie 1
1 / 6

Mandalorian Helmet – X-Sense X501-M Smoke Detector Mount for 3D Printer Enclosure (Remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DE: Rauchmelder-Halterung für einen X-Sense X501-M, integriert in einen Mandalorian Helm und ausgelegt zur Montage auf e

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Deutsch 🇩🇪

Diese Halterung ist ein Remix, entwickelt um einen X-Sense X501-M Rauchmelder sicher in einem Mandalorian Helm zu befestigen und den kompletten Aufbau auf einem 3D-Drucker-Gehäuse zu platzieren.

Statt Kleben kommt eine mechanische Befestigung mit 2× M4 Einschmelzgewinden zum Einsatz, was für einen stabilen Halt und einfache Demontage sorgt.
Der Rauchmelder bleibt vollständig funktionsfähig, während der Helm seine ikonische Optik behält.

Getestet wurde das Modell in PETG (Nobufil Candy Smoke Grey) mit variabler Layerhöhe und Blitz-Infill, was eine gute Kombination aus Stabilität, geringem Materialverbrauch und sauberer Oberfläche ergibt.

Ideal für:

  • 3D-Drucker mit Gehäuse

  • Werkstatt- oder Hobbyräume

  • Alle, die Funktionalität nicht ohne Stil akzeptieren

Das ist der weg ;-)


English 🇬🇧

This mount is a remix designed to securely hold an X-Sense X501-M smoke detector inside a Mandalorian helmet, intended to be placed on top of a 3D printer enclosure.

Instead of glue, the design uses 2× M4 heat-set inserts, providing a solid, reliable mount while allowing easy removal if needed.
The smoke detector remains fully functional, while the helmet keeps its iconic appearance.

The model was tested using PETG (Nobufil Candy Smoke Grey) with variable layer height and Lightning infill, resulting in a strong yet material-efficient print with a clean surface finish.

Perfect for:

  • Enclosed 3D printers

  • Workshops or hobby rooms

  • Anyone who prefers safety with a bit of character

This is the way.


Druckempfehlungen / Print Settings

  • Material: PETG empfohlen (PLA möglich, aber nicht ideal am Gehäuse)

  • Filament: Nobufil – Candy Smoke Grey

  • Layerhöhe: Variabel

  • Infill: Blitz / Lightning

  • Supports: Ja

  • Hardware: 2× M4 Einschmelzgewinde

Tagi