3030 Extrusion Base Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick print stable base to hold 3030 Extrusion based enclosure with screw holes and retaining holes if needed
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to make an enclosure for my cnc micro mill to contain dust and chips, so I grabbed some 3030 extrusion, and used some high quality double sided tape to mount 0.060" (~1.5mm) clear polycarbonate I had laying around.
There are two version, one that accommodates the polycarbonate sheet, and one for just the extrusion. They have two holes for #8 wood screws (I mounted mine to a baltic plywood top on my micro mills workbench). There are screw holes if you want to screw into the 3030 extrusion (though you will need to drill and tap the aluminium) that I am not using since I want to easily be able to move the enclosure.
The frame becomes surprisingly stable, and holds very well, while still being easy enough to lift off to access the back of the machines. This lifts the 3030 off the bench enough that I can pass wires under. I will design and print snap in fillers to prevent dust from blowing under panels.
I used these corners for the enclosure: