Cobi StuG IV Side Skirts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No limited edition, no problem! Add side skirts to your Cobi StuG IV (2576). Optional magnet lock and muzzle brake
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was made for Cobi set 2576. The parts may be compatible with other similar Cobi Panzer IV sets, but that has not been tested.
Slicing Instructions
Import the parts to PrusaSlicer their original orientation. the side skirt STLs have multiple bodies. You can set the cross in the middle to its separate own color by selecting the model, and clicking "split to parts" in the top toolbar.
Assembly Instructions
After printing the parts, remove four 1x2 plates from the locations shown on the StuG. Replace the plates with the anchor parts.
The skirts should now slide on. The side skirts and anchor pieces contain holes sized to fit optional 6x2mm magnets to help the skirts attach more securely.
If the printed parts fit very tightly over the bricks, considering sanding the interfaces to prevent damage to the parts.