Cura 4.7 FlashForge Creator Pro Printer Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Install Instructions Easy way: The Github has an installer you can just run and install. Hard way: Just download the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 602
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Install Instructions
Easy way:
The Github has an installer you can just run and install.
Hard way:
Just download the master zip and drop the files into your cura install folder NOT THE APPDATA.The most common install location is C:\Program Files\Ultimaker Cura X.X
Click HERE for bug reports
Extra Notes
Starting Gcode
The Gcode for thestart script does not have M104 (Set Extruder Temp) so that cura can generate those for you. If the M104 was in the start script then you would have do disable the other extruder like Egurs profile or have whole different profiles for each side like Lyl3s profile. So you need to make sure that you have a skirt around your print because this profile does not have any purge nozzle scripts in the starting Gcode.
Gcode Flavor
This is set to reprap for better use with Octoprint.
Video of Workflow
Category: 3D Printing