DZ60 Keyboard Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dave and I worked on a case for a mechanical keyboard (DZ60) where the wrist angle was incorporated and it had room to…
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 1104
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Dave and I worked on a case for a mechanical keyboard (DZ60) where the wrist angle was incorporated and it had room to store the cable.
There is a depression on each of the four bottom corners for anti-skid feet. Unfortunately they are at work right now so I am not sure what they are... update later.
Also, as we use methylene chloride for glue which is really nice (not really glue as it melts PLA), this case is a two-piece that requires gluing. There are 3 tabs to reinforce the joint.
Feel free to take it from here and come up with your own joining design!
Hope you like it!!
Print Settings
Printer:
AM8 + Titan Aero + MKS
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
20
Filament:
Inland PLA
White
Category: Computer