Stroz & Bickel Mighty+ Crafty+ 16mm Bubbler Adapter Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mold to cast a adapter for the Storz & Bickel Might+ and Crafty+ vaporizer to combine it with a bubbler
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mold to cast a adapter for the Storz & Bickel Might+ and Crafty+ vaporizer to combine it with a bubbler that has a 16mm glass tube.
This Adapter MUST be casted from high temperature two component silicone! Don't use standard 2k silicone!
Printing
Print the Insert.
Print the "Crafty_Adapter-Mold_half" twice.
Set it to print on the Bump on the side.
Materials
2x M3 >15mm
1x M5 ≥ 5mm ≥ 25mm
1x M5 washer large (DIN9021/ISO7093)
Assembly
The insert has a modeled M5 thread, depending on your printer you might want to recut it.
When putting the Mold together, the left hole is a through hole and the right one is for the thread.
You might want to cut the right hole wit M3 (but can be assembled without)
Put the halfs together, screw the M3 screw in the left hole
Redo from the other side for the other hole
Secure the Insert with the M5 Screw and Washer
Use
Measure your two part silicon. The adapter needs around 6.2ml, due to losses int he cup, mix more. I usually mix around 9g.
You can add silicone pigments if you like.
pour into the tilted Mold and let the silicone flow into the cavities.
Wait for it to harden.
Take out all the screws.
Push out the insert.
Take the mold apart, work slow, there are undercuts, you'll get it out, but take your time.
Trim of the flashing.
Done!