DriveKeys v11 - Wheelchair Drive Plate Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular drive control mount that lets wheelchair users quickly swap front-mounted input plates.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Open Community License v1
Mike Hansen from Barbaric Mellons uses an Invacare Torque–style power wheelchair with an ASL 128 Molecule Joystick as his primary drive control.
This version of DriveKeys replaces the fixed front section of the drive control mount on his wheelchair with a modular system: a permanently mounted base plate, forward forks, and swappable front plates that slide in and lock securely.
This allows for quick swapping between driving, gaming, and utility configurations in seconds—without tools.
Available Front Plates:
Additional Hardware
The platform standardizes on standard M5 hardware. Heat-set threaded inserts provide rigid mounting with secure threading.
3x M5x20mm socket cap bolts
4x M5x40mm socket cap bolts
Required Tools:
M5 Allen Wrench
Soldering Iron with temp control: I use a Pinecil set to 330c to heat-press the threaded inserts into the prints.
If you or someone you know could benefit from something similar, especially if you don’t have access to a 3D printer, reach out at [email protected]—we’d love to help. And if you're enjoying these projects, consider supporting me on Patreon to help keep the ideas and designs coming! patreon.com/oddinventor.