The Mini Flexy Stick Figure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mini version of my stick figure that you can make out of silicone.
- Ocena
- 5 / 5
- Polubienia
- 78
- Pobrania
- 392
- Wydruki
- 2
- Wyświetlenia
- 1572
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This is a mini version of my Flexy Stick Figure. This is a stick figure that you can make out of silicone. It is fun to fidget and play with and has a simple look to it. The mold box for this version has been completely redone to work better at the smaller scale.
When using the 3D printed mold box, you will need only around 4 to 5 mL of your silicone solution to pour in. 15A is a good silicone thickness. I also recommend printing the two parts of the mold box vertically to get as much detail as possible (all the files should already be in the correct orientations for printing), and it still won't need any supports when printed like this. Make sure to also clamp the two parts of the mold box together before pouring the silicone. Tip: Using a syringe can make it easier to pour the silicone into the hole at the top of the mold box.
Most accessories made for The Flexy Stick Figure should still be compatible with this model if you shrink them to 50% scale and enable the “detect thin walls” setting.
Check out the original, normal-sized Flexy Stick Figure here.
Check out the entire Flexyman collection here.